The purpose of the project is to; develop, build and test a filter system that can process product gas from a gasification process so that this gas is prepared for subsequent use. In addition to this
The purpose of the Straw2Gas project in full is to demonstrate the use of straw fibres from the JENA straw treatment plant for the production of biogas, and thereby open for a commercial and technical
The project will examine how concrete technology can be applied to large offshore wave energy devices in this case Wave Dragon and KNSwing. The study will examine solutions such as ordinary reinforced
Light tar is a significant contaminant in gas thermally produced from biomass using updraft gasifiers. This tar represents a server risk with respect to formation of deposits within the gas-driven
Utilisation of biomass and waste is generally expensive and not very efficient on small and medium scale plants. For gasification systems the main problem is the gas cleaning, where severe
Uneven char conversion and in extreme cases channels have been observed in the char bed of down draft gasifier. This might lead to a reduced efficiency of the gasifier.
The aim of the project was to optimize the biogas process of high ratios of the organic fraction of municipal solid waste (OFMSW) in co-digestion with manure. Optimization was aimed with regard to
Microbiologically induced corrosion (MIC) in district heating systems is a well-known phenomenon, which to a large extend has been associated with sulphate-reduging bacteria (SRB). Detection of these
The goal of the project is to collect, promote, and communicate the knowledge of pyrolysis and related thermal conversion processes for production of fuels and chemicals from biomass.
The aim leading to the LT-CFB concept is to create better access for the efficient, clean and economic utilization of bio-fuels and waste products having a high content of slag forming and/or