Efforts to change road transport is focused on electrifying the transport sector. The main disadvantages of this strategy are that it requires replacing the existing vehicle fleet and an entirely new
The main purpose of this project is to develop and demonstrate an optimized heating plant that will have much higher efficiency and much less CO2 emissions than the heating plants that are built today
HydroThermal Liquefaction (HTL) has proven itself as the most resource-, energy- and cost efficient technology pathway for conversion to liquid fuels of a wide range of sustainable feedstocks
The purpose is to develop a sustainable, operational and commercially viable biofuel to replace currently used fossil-based fuels in the maritime sector. Developments are based on patented.
The aim of the project is to develop ensiling as a method for pretreatment of straw which allows use in biogas plants and ensures a higher biogas yield. Wet or moist straw is treated with ’ensiling
Biowaste2Gas’ laboratory scale model is upscaled to a pilot plant. Following the initial testing, the plant is moved to demo-site for lifetime testing. In parallel, AU documents the potential in
InjectMe develops a biological Power-to-Methane technology that uses electricity and CO2 from biogas to produce biomethane (electrofuel). The aim of InjectMe is to develop a cost-efficient system for
Demonstrating that the effect of using pre-treated low valuable biomasses is an improved capacity of any given biogas plant by demonstrating that the pre-treatment provides the same amount of
Light tar is a significant contaminant in gas thermally produced from biomass using updraft gasifiers. This tar represents a server risk with respect to formation of deposits within the gas-driven
Utilisation of biomass and waste is generally expensive and not very efficient on small and medium scale plants. For gasification systems the main problem is the gas cleaning, where severe
Uneven char conversion and in extreme cases channels have been observed in the char bed of down draft gasifier. This might lead to a reduced efficiency of the gasifier.
The aim of the project was to optimize the biogas process of high ratios of the organic fraction of municipal solid waste (OFMSW) in co-digestion with manure. Optimization was aimed with regard to
Microbiologically induced corrosion (MIC) in district heating systems is a well-known phenomenon, which to a large extend has been associated with sulphate-reduging bacteria (SRB). Detection of these