AM-Farm will set up the first Danish photopolymerization based Additive Manufacturing (AM) Farm that will cater to agile intermediate-sized production (1000-100,000 components) that can
Construction is one of the key sources of CO2 emission. One of the most used construction materials are bricks, with more than 5 billion being produced each year. Bricks are typically made of
The heat treatment of food and side streams for feed requires vast amounts of energy, most of which derives from fossil fuels. Ohmic heating is an established electrified heating technology
Construction aggregates is a broad category of coarse grained materials like sand, gravel and stone used in construction and infrastructure projects. Aggregates are the most mined resources
Renewable and excess heat sources are representing nearly a third of the energy supply used in district heating and coohng. Excess heat has the potential to grow further and become an important part
The purpose of this project is to make the existing propeller polishing robot prototype robust for frequent use without breakdowns. The robot will be able to maintain ship propellers to a high
In many regions of the world, the lack of cooling facilities leads to a huge food waste, and it is a severe barrier for economic development. The aim of the present project is therefore to develop
Early 1997, the Executive Committee of IEA SH and CP approved a 2 year extension of Task 20 'Solar Energy in Building Renovation'. The aim of this extension was to develop strategies for an effective
The object of the knowledge dissemination programme is to contribute to a continuous, efficient and target group-oriented dissemination of the research results of the research programme for the Use of
Forskningscenter for Elektroteknisk Energiomformning E/F (CETEC)
EFP
1997
1997
The aim of the project is to investigate the different possibillities for developing a compressor used for refrigerators. The goal is an energy efficient compressor
This project is a part of the IEA SH and C Task 23 - Sustainable Solar Buildings. The Optimisation of Solar Energy Use in Larger Buildings. The main objective of the Task is to ensure the most
A measurement system has been built, for Calorimetric Measurement of power in the range 1-50 watt, at test temperatures between 20 and 70 deg. C. This Measurement System is intended to provide a
We wish to establish the technological basis for the reduction of electricity consumption in the case of a wide range of industrial pumps. Pump usage covers a wide range, such as irrigation, heating
The controllable micro-mechanical switch, the micro-switch or the capacitative networks switch (KNK) was invented in 1994/1995 by NRC/MIC. This was based on LK wanting to manufacture electrical
The task are completed with the following results. 1) New glazing systems with a balance between heat loss and solar gains: A new system for montage of glass with overlap connections has been designed
In ECO-HOUSE 99 in Kolding, Denmark, 59 ecological low energy terrace houses were constructed. The houses are designed as ecological buildings with emphais on total economy based on low operation and
The project has resulted in a number of design proposal demonstrating how new types of glazing can be fitted into multi-storey buildings and how new facade expressions, space and lightning effects can
The purpose is to develop a tool, which can improve the calculation of air and energy flow in large enclosures. Two kinds of tool usually applied in advanced calculation of large enclosures are