The objective of BLATIGUE-2 is to develop fast and efficient fatigue testing methods for large wind turbine blades, to develop smart equipment to excite the blades under such tests and to increase
The purpose of the project is to increase the liability of blades in operation by installing RTZ Solution. Further, the purpose is to reach higher cost efficiency and higher AEP for the wind turbine
Fatigue of fiber rope is crane applications is not well established, why extensive full-scale testing is currently required for using fiber ropes in crane applications. The main objective of this
LERCat enables leading edge roughness (LER) repairs of wind turbine blades at the right time, yielding a 1 bn DKK/year gain across the partners’ turbine fleets. This is achieved by establishing an
The project involves the development and maturement of a drone charging station and a drone system. The combined system should then be capable of conducting autonomous wind turbine inspections and
Managing offshore corrosion is a subject that is heavily regulated and combined with several industry standards that must be followed to ensure the structure integrity of the assets. Yet, whilst, and
The purpose of IDEA is to establish reference site conditions and wind reference wind farm designs for floating wind turbines. The project follows the international IEA project on wind farm design and
The overall objective of this project is to further adapt, improve and expand the existing operational tracking technology that Claviate has developed to cover the entire onshore wind turbine
We aim to demonstrate that a radically new blade technology combining jointed modular blades with advanced tips made with additive manufacturing can enable increased rotor sizes by up to 20% and lead
The overall objective of the project is to explore the potentials of a completely new wind turbine
concept – the Low-Wind turbine, designed for optimal integration in a power system with
considerable
The MADEBLADES project targets further development and prototype demonstration of a disruptive design and manufacturing solution for large (>90m) offshore wind turbine blades.
The purpose is to develop a new methodology for the assessment of the remaining useful life of wind turbine rotor blades individually, based on their individual damage states. The methodology is
The scope of this project is to develop a crane that can install a complete turbine with a hub height of 250m. The turbine can be installed in less than 2 days and the weight of the crane is less than
The obejctive of ProbWind is to develop and demonstrate the basis for reliability-based/probabilistic design of wind turbines, leading to the development of a new international standard on
The objective of the LICOREIM project is to demonstrate lidar-assisted wind turbine control strategies for robust and reliable improvements on both currently operating (i.e. retro-fit solutions) and
The purpose of this project is to test/demonstrate the proof of concept of the developed lifetime extension concept for offshore wind turbines. It is expected that by using the developed concept it
The project aims at increasing the efficiency of new and operating wind tubines by developing innovative vortex generators, i.e., small devices attached to the surface of blades, improving their
This project focuses on providing solid proof that a) 3D printing can be used to manufacture tall wind turbine towers, b) it can be done economically and technically feasible, c) 2 design concepts for