The purpose of the project was to develop a catalogue of different solar shading coefficients for solar heat gain and daylight in combination with different glazing types.
The objective of this project is to establish some basic guidelines on the appropriate integration of daylight in the building design. Published as SBI directions, the guidelines will provide the
The aim of this project was to document energy savings and user acceptance for different control strategies for artificial lighting in the Bayer Headquarter, DK, where artificial lighting is
The report contains environmental data sheets for 40 selected building elements of different sizes. An environmental data sheet outlines the contribution of the building element in question to a
In the project, reservoir characterisation of the Roar field, including a ranking method for geostatistical models has been developed, implemented and demonstrated.
In the starting phase of this research project two different sets of data have been constructed (by Statistics Denmark): one of the datasets includes information on the level of transport measured in
Conservation of carbon stores in forest soils is important in order to maintain the fertility of soils and to avoid emission of carbon dioxide to the atmosphere. If bioenergy chips should be regarded
De Nationale Geologiske Undersøgelser for Danmark og Grønland
EFP
1997
1999
The main objective has been to perform a multidisciplinary study in order to describe the petroleum systems and to identify play models in the Conozoic Song Hong Basin located on the Vietnamese shelf
The aim of this project was to investigate if the biological methods, such as bioaugmentation of reactor with specific anaerobic, hydrolytic bacteria will improve hydrolysis of fibers and result in an
Transfer of technology and industrial cooperation require a common framework, thus a compilation and analysis of Russian wind load and other external conditions in relation to European wind turbine
The project constitutes a continously running 5 years research programme on aeroelasticity with the objectives to improve the basis for design and optimization of wind turbines, and establish an
The long-term purpose of this project is to form the basis for the application of high-Tc superconductors in the Danish power sector with potentially commercial savings.
Today we have a blurred picture of which products and systems within ventilation people will demand in future. In order to give interested an incentive to do the necessary initiatives a technical
The results of the investigation show that the thermal conductivity of the types of polyurethane used in district heating pipes is not 0.250 W/(m K) - which typically is used, but only 0.215 W/(m K)
The aim of the project was to develop and demonstrate an upscaled novel combustion process for waste and biomass based Combined Heat and Power plants - including the demonstration of excellent
IRD A/S has developed and tested a new high efficient grid connected DC/AC inverter concept for household, small scale photovoltaic power supplies for households etc. The inverter concept has been
Anaerobic biogas digesters are often manual regulated. This manual regulation is based on evaluation of data from the process, intuition, experience and rule of the thump. It is possible to transfer
This report discusses different methods of sampling and characterising of tar compounds undertaken by companies, institutes and universities dealing with thermal gasification technology and its
The purpose of the project is to develop and test micrometeorological tools for the prediction and estimation of properties of the wind that are important for loads on wind turbines situated on land
The purpose of the project is to perform an experimental investigation of extreme load on wind turbines, measuring both the wind field and the structural load response on high wind speed sites.