Development of refrigeration plants utilizing air refrigerant is the aim of the project. Development of both heat exchangers with water seperation (possibly ice) and a noise reduction system (active
The aim of the project is to reduce the energy used in gas-cleaning plants by improving the fluid dynamic flows through the plants. The project applies a combination of state-of-the-art Computational
The starting point of this project was that the joints should fulfil the requirements during their entire expected life. Therefore, the work has concentrated on investigations connected with ageing
The three major objectives were: 1) To identify and analyse the economical and political issues that are relevant with regard to the construction of a tradable CO2-permit market as well as proposing a
The project is a part of the IEA SHandC Task 23 'The Optimization of Solar Energy Use in Large Buildings'. The main objective of the Task is to ensure the most appropriate use of solar energy in each
A comprehensive analysis of the considerable energy savings that may be achieved by improved basis for design and operation of systems for ventilation of schools will be useful for designers and
The aim is to make recommendations on the proper design and maintenance of installations for heating and vestilation where both energy consumption and risk of fungi growth are considered.
The project analyses Joint Implementation (JI) from different analytic angles in order to examine to which extent and in which ways JI can be applied for the promotion of cost-effective CO2 reduction
The aims are to make information about Danish energy research and its results available to users in Denmark and abroad and, through international cooperation, to make international research and its
The emphasis of the project is on activities that can be used in the development of construction that can fulfil the stronger requirements in the coming regulation BR-2005.
For controlling the harmful emission from coal use for power generation, FLS Miljø is developing a new flue gas cleaning process that promises to be cheaper and to require less space than the
The project's superior objective is to work as a catalyst for distribution and practical use of a number of optimization methods and tools for the district heating sector. By collecting these
The goal of this project is to clarify to which extent the indirectly fired gasturbine (IFGT) in the future can be expected to contribute to the production of power and heat from biomass.
The project aims at finding suitable scale resistant coatings and testing these coatings operationally and mechanically in laboratory tests and in practical installations
The purpose of the project is to identify and analyse market imperfections of relevance for the future Danish electricity market (limited to the four Nordic countries and Germany).
In this project the prospect of implementing a UASB reactor (Up-flow Anaerobic Sludge Blanket reactor) for detoxifing recirculated process water has been examined.
A method has been established for production of the anode supported thin-electrolyte cell. The anode supportis 200mum thick and made of NiO and TZ3Y by tapecasting. The electrochemically active anode
De Nationale Geologiske Undersøgelser for Danmark og Grønland
EFP
1998
2000
The amounts of silica and the different types and amounts of clay minerals are investigated in a number of samples from the Upper Cretaceous-Danian chalk for determination of stratigraphical and