Develop PV-optimised power products, for maximised economical yield of the PV generation. Describe how data from the electronic meters can be integrated into distribution and trading companies'
In connection to agreed Climate plans and low energy building implementation it is proposed to realize best practice building integration of PV systems in Danish cities. There will here be a total
DEXA1:5 is a development project which aims to use an innovative, simple and flexible technology to validate wave energy as a cost-effective, competitive source of electrical power. Activities defined
The "PV Island Bornholm" (PVIB) project aims at establish 5 MWp PV on the island of Bornholm. Of this, app. 1MWp will be installed in this phase. PVIB will focus on demonstration and further
The objective of the project is to make a 24 m long 1:10 scale version of a Leancon wave power machine that uses airflows created by a wave moving up and down a tube. The project is based on a
Development and testing different methods to fasten mono crystalline solar cells to a standard zinc roof system and finding different mono crystalline solar cells to find the optimal configuration.
PolyStaR aims at demonstrating large-area processing of polymeric solar cells with improved stability and reliability. A transnational consortium addresses the problem of unifying power conversion
The project etablishes a large-scale PV cell system in a completely new canvas structure above the roof of the stand at Hvidovre Stadium as part of the development of a ground-breaking concept for
The project aims at optimising Wave Star wave machine production from irregular waves through sophisticated control of the back pressure in the hydraulic system in each floater. The system is being
Grid connection and electricity production optimisation from a 500 kW Wave Star wave power unit located at Horns Rev. The project is closely linked to project 10239. If the project achieves the
The purpose of this project is to disseminate information and knowledge about the use of solar cells in houses. In the project BIPV solutions has been developed, installed and tested in four new
The roofing layout for the new office building is designed with roof surface with single slope in one direction. All roof structures will be with aluminium sheet cladding sufficient for adding solar
The project is based on a previously tested 1:40 model of a new type of wave energy converter, which has so far shown good properties. The objective of the project is to measure loads on the
The goal of the project is the continued development and validation of a PowerShade window and facade element, which is a strong solar shading and a semi-transparent solar cell. The core technology is
The project aims over a three year period to install approximately 1 MWp of grid connected PV systems on a selection of the municipal buildings targeting coverage of all major building applications, e
The first step is to combine a hydrodynamic model of the waves with a dynamic model for the mechanical and hydraulic PTO system to achieve an understanding of the principles behind optimising energy
Optimization of power production and reliability of the Wave Star prototype in Hanstholm. The funding is given as a temporary additional per production hour, and is activated by attainment of
The project will test the abilities of the wave wing as an energy absorber. The test will be performed in the wave tank at AAU following preparation of measuring setup, component list and plan for
The objective of the project is to document and demonstrate the economic, functional and aesthetical potential of thin-film PV installations under Northern European conditions.
The project generated important knowledge about practical light measurements, but also an awareness of the need to characterise light and PV cells with varying spectral light distribution. To address