The objective of the project is to promote the use of district heating driven adsorption heat pumps in Denmark. The goal is to ensure that the benefits of adsorption heat pumps, solar energy and
The purpose of the project is to develop demonstrate and document a new renovation concept for existing multi storey housing, reducing the energy demand to Low Energy Class 1. Results are disseminated
The goal was to investigate and demonstrate the abillity to store excess heat in the subsoil down to 100 m in so-called energy wells, and then use the accumulated heat via a heat pump during winter.
DTU has transferred a production technology for the manufacture of plastic solar cells to Mekoprint. Factor 3 has developed electronics that optimize the function of the plastic solar cell lamps and
The project is the Danish part of the second and third year of the IEA project, International Energy Agency Solar & Cooling Programme Task 42 project Compact Thermal Energy Storage: Material
The objective of the project is to assure that Danish solar thermal products follow European state of the art in quality standards and product development in order to increase sale of Danish products
Development and testing different methods to fasten mono crystalline solar cells to a standard zinc roof system and finding different mono crystalline solar cells to find the optimal configuration.
PolyStaR aims at demonstrating large-area processing of polymeric solar cells with improved stability and reliability. A transnational consortium addresses the problem of unifying power conversion
The project etablishes a large-scale PV cell system in a completely new canvas structure above the roof of the stand at Hvidovre Stadium as part of the development of a ground-breaking concept for
The purpose of this project is to disseminate information and knowledge about the use of solar cells in houses. In the project BIPV solutions has been developed, installed and tested in four new
The roofing layout for the new office building is designed with roof surface with single slope in one direction. All roof structures will be with aluminium sheet cladding sufficient for adding solar
The aim of the project is to demonstrate a full scale pit heat storage (60.000 m3 ) in combination with a large solar collector field (35.000 m2) and heat pumps (3 MW).
The main goal was to improve solar architecture as well as better qualified architects and better communication and interaction between architects, engineers, manufacturers and clients.
MicroShades are window glass panes with built-in shading based on geometric screening of solar rays, shading direct solar irradiation from the outside while having a clear outlook from the inside. The
The use of air-conditioning in Denmark is strongly increasing. Most new office buildings are equipped with airconditioning plants. Furthermore the new building regulations means an increasing need for
The project wishes to develop and test season heat storage for solar heating plant based on a salt hydrate. A line of experimental and theoretical studies shall help define how the heat storage is
The project aims at developing and demonstrating a new fluent and isolated selling construction for the 10.000m3 water heating storage in Marstal Fjernvarme. The solution is expected to be implemented
The aim of the project is to measure the collector efficiency and investigate the state of a few old solar collectors for solar heating plants. The collectors, which will be investigated, have been in
This Solar Thermal Action Plan is a follow up on the Solar Thermal Strategy, which showed large potentials for utilization of solar thermal in Denmark. In the Action Plan it is shown how the ambitious