Highly fluctuating local energy generation and consumption will result in energy flows in all directions at several scales. The project addresses the increasing need for energy flexibility on demand
The objective og this project is to develop a new material and method that benefits installation, survivability and lifetime of sub-structures of wave energy converters. The results of the project
The objective of Annex 7 in the International Energy Agency’s (IEA) International Smart Grid Action Network (ISGAN) is to investigate smart grid transition processes in society and institutional
The objective of the project is to demonstrate how end consumers through demand response can provide service that help the operation of the power system and overcome challenges introduced by renewable
The projects objectives are 1) to define the long-term wave climate around Hanstholm area using measurements from three buoys off Hanstholm and by validating modelled against buoy-measured data, and 2
Denmark has since the 1. of January 2013 been a member of the IEA Heat Pump Program (HPP). DEA has designated Technological Institute to be representative of HPP's Executive Committee's work
This open-access book aims at giving a clear overview of all the main technical and commercial aspects that are involved with the development of wave energy converters. The book will be written by
The project´s objective is to build a theoretical knowledge about gyro electric energy conversion systems, particularly for use in connection with wave energy. The primary goal will be to develop a
Projektet omfatter assistancen til opgaver i forbindelse med Danmarks medlemskab af IEA-OES i 2016:
I lighed med 2014 dækker ansøgningen deltagelse i de årlige EXCO møder
30 de ExCo Meeting
The aim of the project is to accelerate the use of large electric heat pumps for district heating through industrial cooperation, research and experimental development. This is the second phase of a
The IDE4L project will define, develop and demonstrate the entire system of distribution network automation, IT systems and applications for active network management. The IDE4L-DK Top-Up project is
An increasing amount of power electronic based units in electric power grids give rise to protection and control difficulties during disturbances. A solution is to install synchronous condensers
This project will conduct experimental research in order to identify the potential of a novel energy storage technology. The concerned technology is based on heat accumulation, in the phase transition
It is possible to reduce the Cost of Energy from Wave Energy Converters by utilizing Digital Hydraulic Power Take Off. The project aims at solving the main technical hindrance for enabling wave energy
The project is part of the development of a tradition of cooperation for further development of wave energy, here, through the implementation of an exemplary development process. The project contains