The objective is to improve the design basis for large wind turbines by measuring wind and turbulence profiles at high altitude above a flat ground using modern instruments. The project will study
The research has resulted in new PEM-membranes structures both with and without fluor with a wider temperature window and good mechanical strength. The PEM may be used in both hydrogen- and direct
The idea behind the concept is to activate the reduction of NOx and the oxidation of soot and hydrocarbons by the use of an all solid state electrochemical cell based on an oxide ion conductor. The
The focus of the centre consists of several pioneering techniques for understanding the relationship between biomass structure, proteins and process stages needed to convert it to mainly liquid energy
The strategic research centre will in cooperation with the industry, by the development of zero emission buildings and related technologies, create the necessary basis for a long-term sustainable
The vision is that the increased research on main wind turbine uncertainties and risk & reliability will lead to less conservative designs and more cost-efficient wind energy. Therefore, careful
The usage of new reinforcement fibre and resin systems allows for novel forms of blade design, cost optimisation and production methods that significantly reduces the production time.
The HyLIFT-C3 project develops and commercial- ises hydrogen propelled fuel cell hybrid systems for pollution free and time efficient propulsion of forklifts for warehouses and distribution centres.
A platform has been developed for production of enzymatic biodiesel. The production is made flexible to enable the use of a wide range of oil qualities. The processes have been document- ed
Allocation of extra heat is essential for the survival of newborn piglets. Sensors in each farrowing pen provide information about the animals’ welfare and control allocation of heat according to
Break-through new technology has led to a functional prototype with “Switch Mode Power Supply” based on “Piezoelectric Transformer” including energy recovery.
Sensors based on new, patented optical measurement techniques enable extreme ruggedness and the ability to measure several parameters at the same time.
Employing a porous metal structure enhances the robustness of new high temperature fuel cells. Stack modules are being developed with these novel cells, initially for applications such as truck APUs.
To fulfill the next target goals of MEA performance, amount (mass) of platinum used, cost and lifetime defined in the national Danish strategy on PEM FC, it is of utmost importance to develop material
The object of this project is to determine the osmotic power potential in Denmark, including possible locations for and barriers to application of the technology. The environmental aspects will be
The aim of the project is elaborating and making the complete preparation for fullscale demonstration of an entire technical, economic and financial concept.
BIOSYNERGI PROCES ApS
ForskEL
2008
2011
The aim of the project is gathering and successively dissemination of operation experiences with the complete at complete Gasification plant named Castor. As a specific task in the project work will
The option to produce and utilize a slurry of char and pyrolysis oil as an energy carrier will be investigated. The objective of the project is to in-vestigate if a flash pyrolysis unit can be
Biomass is considered an important source of renewable energy needed to realise national and European renewable energy goals and goals for CO2 reduction. Biomass gasification as a technology is
The overall objective is to provide clear understanding and documentation on which measuring technique(-s) should be implemented in existing and future biogas reactors in order to increase