Danish Technological Institute is the leader of one work package in this international project. Raw material which today is only partially or completely unexploited with respect to a biofuel resource
Stirling DK has designed and built a containerized combined heat and power plant with one Stirling engine and an up-draft gasifier fuelled by wood chips. The plant is fitted into three 20” standard
The project ''IEA Bioenergy - Task 37, Energy from biogas and landfill gas'' is in fact an international partnership of knowledge transfer and research exchange, aiming to carry out expert technical
This project is motivated by the vision of being able to understand and model complex structural mechanisms and failure in large composite structures such as current and future wind turbine blades
A demonstration facility has been erected at Kalundborg for production of 2G bioethanol based on straw. The facility was erected at the Asnæs plant in Kalundborg. The facility can produce 5.4 mill
Terranol aims to develop a new yeast strain, which efficiently can transform all carbohydrates in residual biomass, such as straw to bio ethanol. Furthermore the project aims at solving central
The aim of the project is to obtain significant fuel cell performance and cost reductions through component and manufacturing technology development. The project has concentrated on the two key
In the Backup Power segment, the fuel cell units have been developed, certified and delivered. A total of 32 fuel cell backup power systems have been delivered to EnergiMidt. In the material handling
This partnership has developed a model for innovation networks, as well as a website, and a market study was prepared. This study was reproted in four market reports on four product areas and seven
Kommunekemi A/S. Udvikling
ForskEL
2008
2011
The purpose of the project is to recycle phosphate from ash stemming from mono-incineration of meat and bone meal, manure fibre or sewage sludge. These ashes are rich in phosphorus and may after
In connection with an 2008 expansion and renovation of Lemvig Biogas Plant, various serial operation configurations were tested/demonstrated in full scale. The plant was expanded from having a
The mixing of cold and hot gas flows is like mixing water and oil, i.e. it is difficult to obtain perfect mixing and it requires optimized injection of flows. Furthermore, biomass is a high volatile
The project aims at developing a meteorological software tool for large wind farm planning. The project is based on data from previous projects on large wind farm shadow effect. The existing tools
The project focuses on a theoretical and experimental study of floating platforms for wind turbines, wave power systems and the relationship between wind and wave power. The project basis is the
The objectives of this project are to selectively reform hydrocarbons leaving a biomass gasifier to eliminate downstream problems with tar, simplify the energy recovery of the hot producer gas and to
The utilization of waste/RDF fractions in full-scale, suspension-fired boilers provides a number of immediate advantages, compared to incinerating the waste/RDF fractions on a grate. The investment
Teknologisk Institut
ForskEL
2008
2012
A method for producing liquid, gaseous and solid biofuel from the marine algae Ulva lactuca will be developed. Growth conditions of Ulva lactuca will be optimised through laboratory scale growth
With assistance from DTU and COWI A/S, Weiss A/S established a pilot gasification test plant with nominal capacity of 600 kW thermal power (Project 6529). The plant is an upscaled version of the
The objective is to improve the design basis for large wind turbines by measuring wind and turbulence profiles at high altitude above a flat ground using modern instruments. The project will study