The project generated results in selected areas of flexible multibody wind turbine modelling. Monte Carlo statistical response simulations and failure probabilities require significantly reduced
In DTU's and LM Wind Power's wind tunnel, the project performed several measurements of the flow behind vortex generators (VG). The project proved that the induced vortices effectively counteract
By setting up an experimental facility - SYSLAB – the project studied aspects of the basis for distributed resources such as wind turbines, photovoltaics and not least consumers participating in power
The project aimed substantially to strenghten the scientific basis for the wind turbine sector in general with particular focus on the Danish sector’s position in offshore wind farms. To meet these
Using catalysts, enzymes and bacterial cultures, the project uncovered promising methods for converting biomass into more valuable products such as fuels in the form of ethanol, methane and hydrogen
The feasibility of utilizing energy crops (willow and miscanthus) and agriculture residues (wheat straw and corn stalker) in an anaerobic digestion process for biogas production was evaluated
The project studied oxidation behaviour of TP 347H and X20 in steam in field/laboratory testing and thermodynamic/kinetic modelling. TP 347H: The interior of the alloy grains oxidise internally
Investigations of long term exposure of SCR catalysts to flue gas from coal-straw co-firing has been carried out in two units of the Studstrup Power Plant with an average fraction of 10% straw on an
This project demonstrated that further improvement and automation of wind power predictions within a 48-hour horizon is possible if the underlying tools such as WPPT (Wind Power Prediction Tool)
The objective was to investigate the safety conditions of the Viking system and to develop and implement a new operating system for flexible heating and electricity demand. The project improved a
In Europe, a number of standards for characterising biofuels are under development. The standards are to promote trade in biofuels on equal terms. The long-term objective of this project is to
The object of this project was to show the existence of high-frequency fluctuations. The measurement of these fluctuations and the subsequent frequency analyses revealed that these frequencies may be
In this project a number of industrial and agricultural waste products have been characterised and evaluated in terms of alkali-getter performance. The intended use is for biomass-fired power stations
The object was to improve existing PARK models for calculating array losses for wind farms with focus on large offshore wind farms. The project shows that intelligent use of the model parameters
The compiled measuring results and modelling tests produced a scientifically founded basis for providing recommendations for future offshore wind farms in respect of mutual distances between farms and
Københavns Universitet
ForskEL
2004
2011
Recycling of nutrients in wood ash is currently made difficult by the Danish bio ash notice (2004). The aims of this project is to develop and compile a well-documented concept for recirculation of
The project establishes a new model of the Danish electricity system in the form of two buses (east and west Denmark), to which new models of load and production units are connected in the form of
The project aimed at developing additives that will minimise corrosion during biomass combustion. To determine the impact of additives on SCR catalysts, the project tested potential additives in the