The purpose of this project is to construct, commission and operate a cost-effective pilot scale Carbon Capture plant at ARC, demonstrate satisfactory operation targeted at net zero energy consumption
The scope of the project is to develop and test an injector technology that will enable the use of alternative fuels in combination with conventional diesel fuel oils. The combustion of methanol and
One of the biggest environmental concerns in offshore oil production is disposal of coproduced water. The project goal is an advanced on-line sensor with a dedicated monitoring-control algorithm for
The objective of this project is to develop, design, build, test, optimize and commission FPPs first full-scale wave PTO system. The resulting PTO design will be used to build four identical PTO units
The project objectives of GOTWind is the optimization of bolt technology for wind turbines from production until end-of-life. Overall, this project will ensure that there are set out general rules in
The project partners aim to develop and demonstrate a subsea robot, ACOMAR - Auto COmpact MArine growth Remover, which increases atomization of the marine growth removal process on offshore structures
The aim of the PlateCell project is to develop and demonstrate roll-2-roll electrodeposition of thin film photovoltaics based on the earth-abundant and non-toxic, CZTS, semiconductor with at least 8%
The aim of the IEA project is to develop economically attractive solar energy supply concepts with high solar fractions of at least 85% of the heat demand, 100% of the cooling demand and at least 60%
The renovation wave is about to reach public schools and institutions. These buildings are not only challenged in terms of energy efficiency but also by insufficient indoor environment, as for example
A significant share of centrifugal pumps is still running direct on-line. The HiCoMMID project will develop solutions making it attractive for end users and OEMs to apply speed control to all their
The main goal of the Annex 85 is to provide the application feasibility of the IEC technologies, and the technology roadmap for using IEC systems in different types of buildings located in different
The aim of IEA ECES Annex 37 is to investigate the present situation of smart design and control strategy of energy storage systems for both demand side and supply side.
The project is on rechargeable batteries for large scale energy storage, where a solution of vanadium is used to hold the energy. A danish produced stack (battery assembly) will be developed, and a
The purpose of the project is to optimise a full-scale design of the GridScale storage technology achieving cost-effective large-scale power to power storage, covering both the 8-18 h duration
The project aims to develop a facade integrated decentralized micro ventilation solution for apartments. The solution becomes renovation friendly, energy efficient and affordable compared to other
Measurement components, mounted in ducts in a ventilation system, increase the system’s pressure drop and hence energy use. This pilot project introduces a newly developed sensor type for measuring of
Steam production in the industry is currently primarily based on traditional fossil fired boiler solutions. The green transition from fossil to renewable energy sources requires technologies for
Heat pumps do not use the management options available today, which can help ensure an energy cost efficient operation, where it interacts with the company's energy systems and the electricity grid