Torrefaction is considered worldwide as a promising key technology for boosting large-scale implementation of bioenergy. It involves heating biomass in the absence of oxygen to a temperature of 200 to
Through dynamical plant simulation and demonstration of primary control (frequency reserves) from WtE plants to the power grid is investigated from a plant techno-economic point of view. The goal is
Aalborg Universitet (Fredrik Bajers Vej)
ForskEL
2012
2015
The 2stageBiogas project will increase efficiency of the biological conversion of organic waste into biogas for combined heat and power production. The focus will be on the improvement of the
Gas from biomass gasifiers contains both dust and tars, and both components are serious challenges for the downstream equipment as gasturbines and catalytic reactors. This project will test
It is the goal to increase the fundament for optimising pellet production and give relations between the quality of the pellet and the conditions during the production.
The aim of the MaxiFuels project is the pilot-scale testing and further developemnt of the 2nd generation concept for bioethanol production from lignocellulosic biomass with the production of biogas
The purpose of this project was to show that condensing flue gasses after filtration in a bag filter is an economical and environmental friendly solution for straw fired heating plants.
The opbejctive of the project has been to improve design and process stability in biogas plants. The results can be divided within the following main categories: 1) Pre-treatment, serial coupling of
Co-digestion of manure with fatty waste may improve biogas production and thus the economy of manure-based biogas plants. However, fat is potentially inhibiting for the biogas process, and biogas
The objective of the project was to study new deNOx catalysts with improved alkali resistance in relation to flue gas from biomass-fired facilities. Alkali resistance of three types of catalysts is so
Experimental investigations were conducted on two identical small-scale SI gas engine generator sets operating on biomass-produced gas from thermal wood gasification. The engines operated with two
The project was the first of a total of five phases, aimed at better understanding and modelling of the dioxin-formation mechanisms in waste-incineration plants. New insight was gained, which may
In connection with thermal gasification of solid biomass, the pollution level of the gas must often be determined. Undesirable components in the gas may include solid matter (particles, salts, soot)
X-ray analysis is a conditional method usable for characterising biomass and biomass ash. The most striking finding is that analysis values for the element silicon deviated consistently and
Den langsigtede vision med projektet er et fuldautomatiseret system, som udnytter en bred front af avanceret måleinformation, avancerede dynamiske modeller til forudsigelse af driftsforløb og