Efforts to change road transport is focused on electrifying the transport sector. The main disadvantages of this strategy are that it requires replacing the existing vehicle fleet and an entirely new
The main purpose of this project is to develop and demonstrate an optimized heating plant that will have much higher efficiency and much less CO2 emissions than the heating plants that are built today
HydroThermal Liquefaction (HTL) has proven itself as the most resource-, energy- and cost efficient technology pathway for conversion to liquid fuels of a wide range of sustainable feedstocks
The purpose is to develop a sustainable, operational and commercially viable biofuel to replace currently used fossil-based fuels in the maritime sector. Developments are based on patented.
The aim of the project is to develop ensiling as a method for pretreatment of straw which allows use in biogas plants and ensures a higher biogas yield. Wet or moist straw is treated with ’ensiling
Biowaste2Gas’ laboratory scale model is upscaled to a pilot plant. Following the initial testing, the plant is moved to demo-site for lifetime testing. In parallel, AU documents the potential in
InjectMe develops a biological Power-to-Methane technology that uses electricity and CO2 from biogas to produce biomethane (electrofuel). The aim of InjectMe is to develop a cost-efficient system for
Demonstrating that the effect of using pre-treated low valuable biomasses is an improved capacity of any given biogas plant by demonstrating that the pre-treatment provides the same amount of
The aim of this project is to contribute to the development of a new generation of grate fired straw plants that comply with stringent emission regulations and offer stable operation as well as
In the EU subsidised project, under the Fifth Framework Programme, a gasification plant was established in Gjøl based on TK Energi’s staged gasification technology.
The project aimed to evaluate a waste gasification facility concept and plan selected components for a pilot facility. The project constructed a horizontal facility in which fuel and oxygen are
The objective of this project was to investigate and increase dark fermentative hydrogen production from organic wastes by optimizing important process parameters (reactor type, pH, temperature