The scope of the project is to develop and test an injector technology that will enable the use of alternative fuels in combination with conventional diesel fuel oils. The combustion of methanol and
The project will demonstrate the eSmr-MeOH technology in an industrial relevant siza to enable commercialization after the project. Combined with techno economic evaluations, this will elucidate how
The overall objective of the project is to explore the potentials of a completely new wind turbine
concept – the Low-Wind turbine, designed for optimal integration in a power system with
considerable
The MADEBLADES project targets further development and prototype demonstration of a disruptive design and manufacturing solution for large (>90m) offshore wind turbine blades.
The purpose is to develop a new methodology for the assessment of the remaining useful life of wind turbine rotor blades individually, based on their individual damage states. The methodology is
The scope of this project is to develop a crane that can install a complete turbine with a hub height of 250m. The turbine can be installed in less than 2 days and the weight of the crane is less than
The obejctive of ProbWind is to develop and demonstrate the basis for reliability-based/probabilistic design of wind turbines, leading to the development of a new international standard on
The goal of 3R is to develop an efficient process for environmentally friendly recovery of precious metals to make them available for reuse in fuel cells and electrolysers, which will be in great
The purpose of the project is to demonstrate how energy production from offshore wind can be utilized to produce renewable hydrogen through electrolysis in an integrated system, where the hydrogen
The objective of the LICOREIM project is to demonstrate lidar-assisted wind turbine control strategies for robust and reliable improvements on both currently operating (i.e. retro-fit solutions) and
The purpose of this project is to test/demonstrate the proof of concept of the developed lifetime extension concept for offshore wind turbines. It is expected that by using the developed concept it
The project aims at increasing the efficiency of new and operating wind tubines by developing innovative vortex generators, i.e., small devices attached to the surface of blades, improving their
This project focuses on providing solid proof that a) 3D printing can be used to manufacture tall wind turbine towers, b) it can be done economically and technically feasible, c) 2 design concepts for
Decarbonization of the maritime sector is a political topic shaping regulations and restrictions for vessel emissions at sea and in ports. The political initiatives focus on CO2, SOx, NOx and particle