The main purpose of the Solar City Horsens initiative and the EFP project of the same name, which started in 2004, was to create a counterpart in Jutland to the ongoing Solar City Copenhagen co
In accordance with the Danish national PV Strategy an investigation has been carried out to: 1) elucidate the connection - if any - between deployment of and prices for PV technology; 2) analyze the
The purpose of this project has been to extend the foundation module in HAWC and FLEX to be able to simulate the frequency dependent stiffness and damping of the foundations.
The Project is a preliminary study of the possibilities for realization of 'Wind Power Academy' on Lolland. The vision of a Wind Power Academy was made as Energi E2 decided to establish a new park of
The project is a research activity aiming to create new technology, reduce specific costs and improve efficiency. The project specifies an inverter concept, which forms the basis for developing
Design and planning of wind turbines involves considerable uncertainties related to estimating the energy production and to assessment of loads and load carrying capacities.
The project aimed at studying the effect of inflow turbulence in blade calculations by using CFD and with several Delayed Detached-Eddy simulations (DDES) for blade profiles, both profiles in free
The project focused on 12 MW wind turbines, i.e. the next generation of multi MW wind turbines being developed for offshore wind farms. These gigantic wind turbines with hub heights of 170 m and rotor
During training of two research students, the project developed new thermocleavable polymer materials for PV cells with a narrow optical band gap, allowing simple production of multilayer structures
An integrated PV cell–solar heating roof solution called PV Optitag was developed in close cooperation between architects and engineers to make new CO2 neutral solutions for urban development projects
The project measured switch transients and voltage quality for three different turbine types in three offshore wind farms: Nysted, Horns Rev and Burbo Banks. The project documented voltage conditions
The object of the project was to furnish a dimensioning basis for future offshore wind turbine foundations. This work contributed to greater understanding of erosion conditions around monopole
The object of the project was to develop an experimental method for estimating the modal properties of wind turbines during operation. OMA (Operational Modal Analysis) proved suitable for
The main purpose of PV Denmark is to continue and enhance the positive development initiated by previous national projects such as Sol-300, Sol-1000 and Sol-2000. The activities shall facilitate, that