The objective of BLATIGUE-2 is to develop fast and efficient fatigue testing methods for large wind turbine blades, to develop smart equipment to excite the blades under such tests and to increase
The purpose of the project is to increase the liability of blades in operation by installing RTZ Solution. Further, the purpose is to reach higher cost efficiency and higher AEP for the wind turbine
Fatigue of fiber rope is crane applications is not well established, why extensive full-scale testing is currently required for using fiber ropes in crane applications. The main objective of this
LERCat enables leading edge roughness (LER) repairs of wind turbine blades at the right time, yielding a 1 bn DKK/year gain across the partners’ turbine fleets. This is achieved by establishing an
The project involves the development and maturement of a drone charging station and a drone system. The combined system should then be capable of conducting autonomous wind turbine inspections and
Managing offshore corrosion is a subject that is heavily regulated and combined with several industry standards that must be followed to ensure the structure integrity of the assets. Yet, whilst, and
The purpose of IDEA is to establish reference site conditions and wind reference wind farm designs for floating wind turbines. The project follows the international IEA project on wind farm design and
The overall objective of this project is to further adapt, improve and expand the existing operational tracking technology that Claviate has developed to cover the entire onshore wind turbine
We aim to demonstrate that a radically new blade technology combining jointed modular blades with advanced tips made with additive manufacturing can enable increased rotor sizes by up to 20% and lead
The focus of this effort is the reduction of uncertainties in offshore wind turbine design, by complete measurement of the effects of interactions of a modern turbine structure (located on the Walney
The objective of the Light Rotor project is to develop the basis for design of wind turbine blades for use on the order of 10MW rotors with lower weight, tailored aeroelastic response and optimized
The purpose is to develop and validate computer codes related to response simulation on offshore wind turbines and their substructures. It is carried out within the framework of lEA Annex 30
Megavind continues to support and consolidate the stronghold of the Danish wind industry through a focused and strategic vector apporach to validation, demonstration, research and education. Megavid
The overall objective of the project is to develop a prototype trailing edge flap system for a wind turbine blade. From its present stage of proven functionality under laboratory conditions it is
The objective of this project is to model and explore the influence of atmospheric stability conditions on structural loading and production losses of wind turbines operating in wind farm conditions
The purpose of the project is to introduce and implement a new dynamic data analysis method, DDA, in the Danish wind industry. This method is based on fast measured data rather than traditional 10min
The purpose of the project is to strengthen the Danish contribution to the International Energy Agency project 'IEA Annex 30: Offshore Comparison of Dynamic Computer Codes and Models' with an
The purpose of the projekct is to duce cost of energy in the design, production, transport, installation and maintenance of monopile foundations for large offshore wind turbines. The primary goal is
The purpose of the project is to improve and validate newly developed models for simulation and prediction of wind power fluctuations, by integrating the tools with meteorological tools for wind