The objective of BLATIGUE-2 is to develop fast and efficient fatigue testing methods for large wind turbine blades, to develop smart equipment to excite the blades under such tests and to increase
The purpose of the project is to increase the liability of blades in operation by installing RTZ Solution. Further, the purpose is to reach higher cost efficiency and higher AEP for the wind turbine
Fatigue of fiber rope is crane applications is not well established, why extensive full-scale testing is currently required for using fiber ropes in crane applications. The main objective of this
LERCat enables leading edge roughness (LER) repairs of wind turbine blades at the right time, yielding a 1 bn DKK/year gain across the partners’ turbine fleets. This is achieved by establishing an
The project involves the development and maturement of a drone charging station and a drone system. The combined system should then be capable of conducting autonomous wind turbine inspections and
Managing offshore corrosion is a subject that is heavily regulated and combined with several industry standards that must be followed to ensure the structure integrity of the assets. Yet, whilst, and
The purpose of IDEA is to establish reference site conditions and wind reference wind farm designs for floating wind turbines. The project follows the international IEA project on wind farm design and
The overall objective of this project is to further adapt, improve and expand the existing operational tracking technology that Claviate has developed to cover the entire onshore wind turbine
We aim to demonstrate that a radically new blade technology combining jointed modular blades with advanced tips made with additive manufacturing can enable increased rotor sizes by up to 20% and lead
The Megavind Partnership was founded in 2006 and the project 2008-2010 is a continuation of the earlier stages of the partnership. It has been the goal of the partnership to establish the foundation
The work is a part of the international cooperation to the IEA-Wind Implementing Agreement, and belongs to a new task - Annex 28: Social Acceptance of Wind Energy Projects. The project has collected
This project is motivated by the vision of being able to understand and model complex structural mechanisms and failure in large composite structures such as current and future wind turbine blades
The project aims at developing a meteorological software tool for large wind farm planning. The project is based on data from previous projects on large wind farm shadow effect. The existing tools
The project focuses on a theoretical and experimental study of floating platforms for wind turbines, wave power systems and the relationship between wind and wave power. The project basis is the
The objective is to improve the design basis for large wind turbines by measuring wind and turbulence profiles at high altitude above a flat ground using modern instruments. The project will study
The vision is that the increased research on main wind turbine uncertainties and risk & reliability will lead to less conservative designs and more cost-efficient wind energy. Therefore, careful
The usage of new reinforcement fibre and resin systems allows for novel forms of blade design, cost optimisation and production methods that significantly reduces the production time.
The cooperation project is conducted with a PhD study as its central element and its research will be used directly in wind turbine and wnd farm development so as to prepare common guidelines under