During the project, a team with special competencies in energy efficiency and sustainable buildings sought to influence clients and advisers in Copenhagen’s Ørestad district to improve project energy
The project has been carried out and has been finalized with a summary report in Danish. Performance tests of new suction hoods have been carried out at F. Junckers Industrier A/S in Køge, Denmark
More than 50% of Danish oil is unattainable because the pores in chalk reservoirs are so small. Nano-Chalk explores ways to enhance particle growth thus increasing pore size and oil pro-duction.
In this project next generation fuel cells are developed towards commercial applications. The projects is based on efficient and robust metal-based fuel cell technology.
Metal supported solid oxide fuel cells were developed for operation in temperature interval 550 – 650 degrees C. Fabrication techniques suitable for large scale production of half cells comprising of
The project follows up four previous projects on biofuels and health and safety at work and focuses on: 1. Method development for airborne dust capture to study any health effects of biofuel dust. 2
The project focused on improving the Open Core gasification unit, particularly reducing the daily monitoring jobs and ensuring stable, unmanned unit operation. A subproject focused on gaining better
An integrated PV cell–solar heating roof solution called PV Optitag was developed in close cooperation between architects and engineers to make new CO2 neutral solutions for urban development projects
The object of this project was to determine the relationship between emissions from gas engines, start/stop procedures and market terms. The project showed that emission factors for natural gas
The project measured switch transients and voltage quality for three different turbine types in three offshore wind farms: Nysted, Horns Rev and Burbo Banks. The project documented voltage conditions
The object of the project was to furnish a dimensioning basis for future offshore wind turbine foundations. This work contributed to greater understanding of erosion conditions around monopole
The primary objective of the project was to improve the understanding of formation and characteristics of waste incineration residue. The project had specific focus on the importance of waste input
It is technically possible to manage and activate the potential for flexible electricity consumption in the segment of large office blocks and public buildings. Practical experiments have shown that
Ørsted A/S
ForskEL
2005
2011
The purpose of this project was to develop materials with higher resistance to the corrosive elements, in order to reduce the cost of maintenance, increase the availability, and increase the
The object of the project was to develop an experimental method for estimating the modal properties of wind turbines during operation. OMA (Operational Modal Analysis) proved suitable for