During this project an up-scaled, near commercial CatLiq plant has been designed. The plant is capable of converting low value feedstock such as pig manure into a high value bio oil, which can be used
The purpose of the project is to develop demonstrate and document a new renovation concept for existing multi storey housing, reducing the energy demand to Low Energy Class 1. Results are disseminated
There has been a further development regarding the manufacturing of bio ethanol from straw and other residues, were the production prices has been reduced to 2 kroners per liter bio ethanol.
The main goal of the project was to develop, demonstrate and implement new tools, models and components in the design process for aeroelastic optimization of Mega-Watt wind turbines with the scope of
The objective of the project was to improve the efficiency of anaerobic digestion of dairy cattle manure. The NiX® treatment improved by 48% the methane yield of the second step of the biogas process
GMR machines and a couple of project participants will develop a prototype and a pilot series of fuel cell driven electrical car. The energy source for the electrical cars comes from a HT-PEM fuel
One of Dong Energy's subsidiaries, Inbicon, has developed a technology that manufactures bio ethanol from non food sources, such as wheat straw. A demonstration plant is made in this purpose. Markets'
The purpose of the project is to develop technologies, which can optimize the thermal storage of concrete constructions. The concrete is being tested in full scale in EnergyFlexHouse at the institute
The project has used tools for process simulation to improve understanding of wind turbine blades. Based on the measurements, the project participants designed a new wing, followed by a demonstration
The goal was to investigate and demonstrate the abillity to store excess heat in the subsoil down to 100 m in so-called energy wells, and then use the accumulated heat via a heat pump during winter.
DTU has transferred a production technology for the manufacture of plastic solar cells to Mekoprint. Factor 3 has developed electronics that optimize the function of the plastic solar cell lamps and
In the project, a chemical reactor system, called OBATE reformer, has been developed to convert ethanol to diethyl ether and water in order to make it into a diesel fuel. It is shown that the
The project is a contribution to the national strategy evolving a dynamic and flexible electrical system with wind as the energy source. The key to the future exploiting of excess energy, is to
The project is the Danish part of the second and third year of the IEA project, International Energy Agency Solar & Cooling Programme Task 42 project Compact Thermal Energy Storage: Material
To obtain cost-efficient and environmental-friendly heat supply focus is put on district heating. Requirements to cost-effective biomass combustion technologies for district heating are: 1) High
The objective of the project is to assure that Danish solar thermal products follow European state of the art in quality standards and product development in order to increase sale of Danish products
The main purpose of the EUDP-project is to develop and demonstrate an LED based prototype lighting fixture that will revolutionize greenhouse lighting as we know it. This objective will be reached
The project partners wishes to develop a gas to gas humidifier membrane for use in fuel cell applications that will meet the specified performance requirements as well as size and cost requirements.
The objective of the project is to make a 24 m long 1:10 scale version of a Leancon wave power machine that uses airflows created by a wave moving up and down a tube. The project is based on a