The aim of the project is elaborating and making the complete preparation for fullscale demonstration of an entire technical, economic and financial concept.
BIOSYNERGI PROCES ApS
ForskEL
2008
2011
The aim of the project is gathering and successively dissemination of operation experiences with the complete at complete Gasification plant named Castor. As a specific task in the project work will
The option to produce and utilize a slurry of char and pyrolysis oil as an energy carrier will be investigated. The objective of the project is to in-vestigate if a flash pyrolysis unit can be
Biomass is considered an important source of renewable energy needed to realise national and European renewable energy goals and goals for CO2 reduction. Biomass gasification as a technology is
The overall objective is to provide clear understanding and documentation on which measuring technique(-s) should be implemented in existing and future biogas reactors in order to increase
With Thorsø Biogas- & Miljøanlæg (hereafter THMB) as reference case for an assessment of the possibility of applying the existing natural gas grid for distribution of biogas will be carried out
The objective of this project is by means of advanced IR as well as advanced camera techniques to increase the knowledge of oxyfuel combustion of biomass and biomass-coal mixtures. Experiments have
The cooperation project is conducted with a PhD study as its central element and its research will be used directly in wind turbine and wnd farm development so as to prepare common guidelines under
Acoustic measurements will be performed at various degrees of wake using several measuring techniques. The results will be compared with aerodynamic measurements to enhance knowledge of wind turbine
The project involves the final process design of a full-scale plant for continuous prodiction of second-generation bioethanol based on results from the IBUS pilot plant, where straw is the basic
In this project, by means of computer simulations, flow conditions of wing tips were investigated for a number of wing designs for wind turbines. Various numeric design methodologies were developed
For the first time ever, this project integrated three design areas in a simulation: electrical design and
optimisation of wind turbines (generator and gearbox), aerodynamic design (material and
The project aims to enhance current knowledge of how temperature and pressure during the production process and the water content of biomass affect pellet quality, and of the mechanical properties of
This project developed methods and tools for modelling various ruptured wind turine blades and for analysing the residual strength of the blades if they crack. This provides a foundation for assessing
This project involved the first two phases in establishing a knowledge centre for wind turbine components. In the first phase, the knowledge centre was officially established, and it was decided that
The project aims to provide the necessary basis for deciding to establish a knowledge centre promoting Danish innovation in the field of wind turbine components. The purpose of the tesst centre will
The project endeavoured to calculate electricity generation costs in modern onshore wind turbines. At average operating costs of DKK 0.08/0.10/kWh, production costs per kWh can be calculated at DKK 0
Through contacts to key players in the biofuels market, various means and policies are considered to identify the most apporpriate package solutions. The results will be used by the European