Break-through new technology has led to a functional prototype with “Switch Mode Power Supply” based on “Piezoelectric Transformer” including energy recovery.
The object of this project is to determine the osmotic power potential in Denmark, including possible locations for and barriers to application of the technology. The environmental aspects will be
The aim of the project is elaborating and making the complete preparation for fullscale demonstration of an entire technical, economic and financial concept.
BIOSYNERGI PROCES ApS
ForskEL
2008
2011
The aim of the project is gathering and successively dissemination of operation experiences with the complete at complete Gasification plant named Castor. As a specific task in the project work will
The option to produce and utilize a slurry of char and pyrolysis oil as an energy carrier will be investigated. The objective of the project is to in-vestigate if a flash pyrolysis unit can be
Biomass is considered an important source of renewable energy needed to realise national and European renewable energy goals and goals for CO2 reduction. Biomass gasification as a technology is
The overall objective is to provide clear understanding and documentation on which measuring technique(-s) should be implemented in existing and future biogas reactors in order to increase
With Thorsø Biogas- & Miljøanlæg (hereafter THMB) as reference case for an assessment of the possibility of applying the existing natural gas grid for distribution of biogas will be carried out
Emissions from gas engines depend on ignition timing and excess of air.Adjustments leading to lower NOx emissions normally lead to increased emissions of unburned hydrocarbons (UHC) and CO. Based on
The objective of this project is by means of advanced IR as well as advanced camera techniques to increase the knowledge of oxyfuel combustion of biomass and biomass-coal mixtures. Experiments have
This project describes and quantifies fine and ultrafine particles emitted from 9 Danish CHP plants powered by solid waste, biomass, gas and gasoil. Measurements of number and mass emissions of PM0.1
At present, there are no safety-technical testing facilities for hydrogen and fuel cells in Denmark, and there is hardly any commercial basis for running such facilities. The project identifies the
Process optimisation is performed at the MaxiFuels pilot plant at DTU in the context of, for instance, membrane distillation of ethanol, separation of the permanent residual fraction from glucose
The Castor plant’s gasification reactor is developed to gasify wood pellets instead of wood chips, and an aesthetic and technically efficient design of the plant is developed for adaptation into a
The developed CFD model shows qualitative and quantitative correlation between the model and experiments in a lab scale reactor. When the developed model was implemented in the full-scale plant, it
To develop the market for solid biofuels within the EU, standards are urgently needed. Based on a mandate given by the EC, CEN TC 335 "Solid Biofuels" currently develops such standards based on the
Nanotechnology can provide possibilities for obtaining new valuable information regarding performance and corrosion protection in power plants. In general, the desired performance of the contact