Biowaste2Gas’ laboratory scale model is upscaled to a pilot plant. Following the initial testing, the plant is moved to demo-site for lifetime testing. In parallel, AU documents the potential in
One of the biggest environmental concerns in offshore oil production is disposal of coproduced water. The project goal is an advanced on-line sensor with a dedicated monitoring-control algorithm for
Demonstrating that the effect of using pre-treated low valuable biomasses is an improved capacity of any given biogas plant by demonstrating that the pre-treatment provides the same amount of
InjectMe develops a biological Power-to-Methane technology that uses electricity and CO2 from biogas to produce biomethane (electrofuel). The aim of InjectMe is to develop a cost-efficient system for
The aim of the project is to develop ensiling as a method for pretreatment of straw which allows use in biogas plants and ensures a higher biogas yield. Wet or moist straw is treated with ’ensiling
The purpose is to develop a sustainable, operational and commercially viable biofuel to replace currently used fossil-based fuels in the maritime sector. Developments are based on patented.
The main purpose of this project is to develop and demonstrate an optimized heating plant that will have much higher efficiency and much less CO2 emissions than the heating plants that are built today
Efforts to change road transport is focused on electrifying the transport sector. The main disadvantages of this strategy are that it requires replacing the existing vehicle fleet and an entirely new
This application concerns the role as national technology lead (NTL) for IEA Task 34 and the activities foreseen to further DK research and industrial development interests within this field of
The purpose of this project is to perform a feasability study on the potential of establishing a full scale demonstration plant that can support a circular energy production on Samsø and help make it
The project is motivated by a need for de-risking of central process steps related to a new application of Hydrofaction for conversion of high ash containing urban waste streams to green
The project aim is to develop solutions for combining renewable energy with the extraction of hydrocarbons is environmentally that are cost effective and support the reduction of carbon emissions
The aim of the project is to further improve the technology for electricity generation from saltwater previously demonstrated by Saltkraft Aps and partners. Using clever control methods, we aim to
Wind farm developers usually verify the performance of their wind turbines after installation. This requires measuring the wind speed upstream of the wind turbine. This is particularly challenging for
The purpose of developing a small scale version of the Ecodrying Bio-refining plant is to ease the handling of horse manure for individual properties keeping horses and to turn their horse manure into
This project enables Danish participation in the new IEA Wind Task on Digitalization which will establish a digitalization roadmap for the wind industry. As a result, the Danish industry will have
The application shall make it possible for Per Alex Sørensen to be able to participate in coming IEA-ECES ExCo meetings as alternate for the Danish Energy Agency if needed.
The IEA WindDK-2020 aims to increase the impact of IEA Wind EUDP funded activities in 2020, through increased visibility and dissemination within the Danish industry and research community.