Sensors based on new, patented optical measurement techniques enable extreme ruggedness and the ability to measure several parameters at the same time.
Employing a porous metal structure enhances the robustness of new high temperature fuel cells. Stack modules are being developed with these novel cells, initially for applications such as truck APUs.
To fulfill the next target goals of MEA performance, amount (mass) of platinum used, cost and lifetime defined in the national Danish strategy on PEM FC, it is of utmost importance to develop material
This project aims to develop a cost-effective high temperature electrolysis technology based on SOECs. The technology development started from the technology developed for SOFCs and takes advantage of
The purpose of the project is to provide the continued research and development which is necessary to improve the cell components and to implement them with industrially relevant production methods
Aalborg Universitet (Fredrik Bajers Vej)
ForskEL
2008
2011
The primary objective of this project is to initiate research activities to support the very successful demonstration project “Dansk Mikrokraftvarme” in two es-sential aspects: 1. As the fuel cell
Directions will be prepared to assist architects and engineers in choosing the optimum combination of window pane and solar shading. The directions will be available for new buildings design and
The project aims to identify the impact of the most recent change in the Danish vehicle registration tax on the sale and use of cars. This will be done through qualitative interviews with key players
This project has created a basis for changing DS 418: Calculations of heat loss in buildings. This makes it easier to implement low-energy solutions in buildings. Methods are more comprehensive, but
The project aims to analyze the interaction between the electricity/CHP industry and the transport industry in a situation of increased use of electric cars and plug-in hybrid cars. The project
The project involves technical support activities in an international competition between inter-disciplinary teams. The competition aims to select the team to design a low-energy (Bolig+) development
The EU project BRITA-in-PuBs involves the renovation of Prøvehallen at the old porcelain manufactory in Valby with insulation of building envelope, new low-energy windows, hybrid ventilation and PV
The project continued the activities under the Danish-Canadian project on more cost-efficient second-generation fuel cell systems for the UPS markets and materials handling. In the UPS segment, a 10
Dantherm Power has produced fuel cell systems as emergency power for a large national radio network for emergency preparedness communication. A total of 117 fuel cell systems have been produced on
The project funds Danish participation in two tasks under the IEA's Hydrogen Implementing Agreement, which in addition to the EU member states counts Japan, The USA, Canada and Australia. In Denmark
Optimising the production of SOFC cells and stacks opens up possibilities for testing and demonstrating products in three market segments, distributed electricity production, micro CHP and APU
The project aims to develop a 260-400 V Battery Management System (BMS) to operate large Li-ion nano-batteries in cars weighing up to six tons. Subsequently, the BMS will be tested in 10 prototype
In this project, tools were developed which offer the possibility of quickly designing layers of fuel cells for various markets and uses. In addition, two reformers were developed which can convert
The aim of this project was to show how a new urban area in the municipality of Høje Taastrup called Gammelsø can become carbon-neutral, including showing how district heating can be a central element
The project aims to facilitate the design of passive houses in Denmark by adapting the German passive house design tool, PHPP, for use by Danish users of Be06. The project is undertaken in parallel