The aim of the project is to make detailed calculations of the necessary energy supply for heavy and light floor heating systems in buildings that conforms to the expected thermal requirements of the
Multi-openable glazed facade in a new multi-storey building. The purpose of this project was to demonstrate how new types of glazing and glazed areas can be incorporated in a new multi-storey building
New solutions have been developed for buildings with concrete panels without ribs at window reveals and at horizontal joints, corresponding to concrete panels with an unbroken insulation layer and
The project was carried out as a part of DK-SOFC 2000 - 20004. The DK-SOFC b line is targeted towards: 1) decrease of the operation temperature without increasing the area specific resistance, 2)
The objective of the project is to verify or falsify the recently published results claiming high hydrogen storage capacities of nanostuctured carbon materials, like for example single-walled carbon
The main purpose of phase 3 was to prepare and present the results from the two first phases in a form that can be directly used by the consultant's in the future school-building activities.
The objective is to investigate and evaluate the function of an office building with extremely low energy consumption for heating. The target is 15 kWh/m2/yer, which is a reduction of 70% compared to
The purpose of this project was to reveal the possibilities of transport of hydrogen via the existing Danish natural gas grid. The investigation only covers the distribution grid. For this purpose, a
The goal of the project was to construct and test a 10 kW CHP (5 kWe) PEM FC generator aimed for single-family households in Denmark. Two generators, each 'half size' of the project generator goal
The PEM fuel cell car will function as a laboratory where components and modules in the future can be upgraded with improved version. Danish industry gets in this way an opportunity to develop and
The project will demonstrate the concept of application of reversible fuel cells integrated into a building, with generation of hydrogen from excess electricity from nearby renewable energy systems
Based on the results from the project's Part l, the purpose of project tasks described in this report was to reconfigure / update the vehicle for dynamical operation with a Danish-produced PEM fuel
The aim of the project has been to single out energy solutions that have a significant energy and environmental influence as well as an acceptable economy in connection with renovation and urban
This pre-project contributes to the development of future systems for room heating and production/distribution of domestic hot water. Focus is on systems having the lowest possible environmental