This Solar Thermal Action Plan is a follow up on the Solar Thermal Strategy, which showed large potentials for utilization of solar thermal in Denmark. In the Action Plan it is shown how the ambitious
The goal of the project is the continued development and validation of a PowerShade window and facade element, which is a strong solar shading and a semi-transparent solar cell. The core technology is
The project is aimed at funding the Danish participation in the project ''Analysis of potentials and costs of storage of CO2 in the Utsira aquifer in the North Sea - StorageUtsira'' within FENCO-ERA
The project aims over a three year period to install approximately 1 MWp of grid connected PV systems on a selection of the municipal buildings targeting coverage of all major building applications, e
In this project, the possibility of using Ionic Liquids (ILs) for CO2 capture was examined. IL’s can be designed to have particular properties. In this project, we attempted to design IL’s with a high
The idea behind the concept is to activate the reduction of NOx and the oxidation of soot and hydrocarbons by the use of an all solid state electrochemical cell based on an oxide ion conductor. The
Break-through new technology has led to a functional prototype with “Switch Mode Power Supply” based on “Piezoelectric Transformer” including energy recovery.
The object of this project is to determine the osmotic power potential in Denmark, including possible locations for and barriers to application of the technology. The environmental aspects will be
The objective of the project is to document and demonstrate the economic, functional and aesthetical potential of thin-film PV installations under Northern European conditions.
Emissions from gas engines depend on ignition timing and excess of air.Adjustments leading to lower NOx emissions normally lead to increased emissions of unburned hydrocarbons (UHC) and CO. Based on
The project generated important knowledge about practical light measurements, but also an awareness of the need to characterise light and PV cells with varying spectral light distribution. To address
This project describes and quantifies fine and ultrafine particles emitted from 9 Danish CHP plants powered by solid waste, biomass, gas and gasoil. Measurements of number and mass emissions of PM0.1
The purpose of the project is to demonstrate the use of high efficient heat pumps and solar power (thermal and photovoltaic) in low energy prefabricated dwelling units. These dwellings shall reach the
Against the background of the SOL-IND project and experience from Japan, one or more solutions for the integration of PV cell units in highly industrialised housing will be selected. The selected
The project has funded Danish participation in the IEA PVPS programme which provides Danish players with the opportunity to establish international networks as well as to obtain the latest
Current instructional material on solar and light energy for electricity production will be mapped to identify the need for supplementary material and to suggest how existing material can be put to
Against the background of the Mariager Fjord project, which assess a possible common district heating transmission system, the challenges of organising, connecting and jointly operating waste
The project funds continued Danish participation in the Nordic promotional site, www.nordic-cleantech.net, which offers various services such as the monitoring of international calls for tender
Being a Danish knowledge centre, the centre collects and communicates information about Danish energy publications to the IEA database ETDEWEB (www.etde.org/etdeweb). Moreover, information about ERP