The objective of Task 25 is to analyse and further develop the methodology to assess the impact of wind power on power systems. The Task has established an international forum for exchange of
The project has generally aim to support Denmark´s participation in the “IEA Wind Energy R & D Implementing Agreement” in 2013 through participation in the Agreement Steering Committee (“Executive
The overall objective of the project is to develop a cost-efficient Lidar wind sensor to be integrated on individual wind turbine in order to maximize power production and minimize dynamic load on the
The purpose is to develop and demonstrate methods for cableinstallation, which via improved cable
fabrication and installation can reduce costs for installation of array-, infield- and export cables
To develop and demonstrate the value of a yaw control kit for wind turbines, which continuously measures
the wind direction in front of a wind turbine and subsequently turns the turbine almost
To develop, prepare for market and demonstrate an applicable method for regaining operational life of
installed wind turbine blades with structural defects based on Bladena’s patented technologies for
To improve the efficiency of wind turbine and wind turbine farms using synchronized sensors on wind
turbines, their wings, and in wind fields. The technology is used in development, test, modeling
Based on participation in the IEA Annex 29 Mexnext II, the objective is to validate and improve a number of different aerodynamic and aeroelastic numemrical models used by both research institutions
This project is the first phase in the development of an advanced test facility which will enable the wind power industry to develop and test new grid connection solutions, and validate the grid
The objective of the project has been to develop and commercialize nacelle-LIDAR technology for power performance verifications such that the expensive and often difficult use of met masts offshore
The project dealt with: optimal use of vortex generators, VGs, that are presently used on most wind turbine blades. Their main effect is to delay separation in the inner part of the blades where for
The projecthas developed a methodto measurenoisefromairfoilsinan industrialwind tunnel,which willhelp to increase theDanishwind turbinecompetitiveness.The methodisthe key tonew
It is a concern in wind energy that wind turbines do not yaw efficiently into the wind due to draw backs of nacelle anemometry. The loss of power is estimated to be 1-3% in flat terrain and offshore
The main goal of the project was to develop, demonstrate and implement new tools, models and components in the design process for aeroelastic optimization of Mega-Watt wind turbines with the scope of