The objective of the project was to improve the use of animal manure for biogas production by a thermo-alcalic hydrolytic pre-treatment. Substantial gas yield improvements have been documented for all
This project will demonstrate erection and operation of an entire biomass gasification plant for CHP production in the commercial size of 1,300 kWth. In the project a complete commercial size forest
The aim of this project is to develop a wood stove with high energy efficiency and low emissions of pollutants and CO2. We will develop a generic control system for wood stoves and an optimized
The partners want to develop and demonstrate a fuel cell system for the production of electricity and heat based entirely on Danish MEA (Membrane Electrode Assembly) and stack technology. The outcome
The objective is to mature solid oxide fuel cell systems to a level where they are meeting critical user requirements for efficiency, lifetime and costs. For residential micro combined heat and power
Solum Gruppen has built two versions of an organic waste conversion plant - AIKAN - able to double the energy output of organic waste compared to the current solution, incineration.
The project resulted in the development, design, engineering, construction, and demonstration of a plant for industrial scale use of cereal straw for anaerobic digestion and production of biogas. The
Map the possible working relations between USA and DK in the hydrogen and fuel cell market. (Energy 11). For reference, a web-based information portal for Danish stakeholders that summarizes all this
The purpose is to develop residential micro combined heat and power (muCHP) systems based on solid oxide fuel cell (SOFC) technology iinto a reliable, efficient, robust, quality product that can enter
The purpose of the project is to select and validate technology concepts for the establisment of a Danish production of green synthetic fuels primarily for fuel cells
Pretreatment and enzymatic hydrolysis for conversion of biomass to germentable sugars is by far the most expensive step in 2nd generation bioethanol production. The project aims at developing and
The project goal is to accelerate the implementation of large scale torrefaction technology able to produce up to 500.000 ton torrified material per year, thereby supporting the political aim of
The D-CODE project aims at developing an innovative diagnostic procedure to detect Proton Exchange Membrane (PEM) fuel cell stack faults and support stack degradation level analysis. The on-line
This project is about optimization of a prototype developed and build during a earlier EUDP demonstration project called 2nd Generation alkaline electrolysis. The project aims on further development
The project objective is to mature the HT-PEM fuel cells (RMFC technology), which use reformed methanol. The project shall, among other things, reduce emissions and prove the efficiency of the system
In the following are show the different work packages. After each the timing and goals are shown: WP1 Screening test and optimization of basic parameters for efficient densification of torrefied
The scope of the project is to develop, design and construct a 1-kW direct methanol fuel cell (DMFC) unit for back-up power, auxiliary power and micro combined heat and power solutions, and to