The purpose of this project is to perform a feasability study on the potential of establishing a full scale demonstration plant that can support a circular energy production on Samsø and help make it
The project is motivated by a need for de-risking of central process steps related to a new application of Hydrofaction for conversion of high ash containing urban waste streams to green
The overall objective of the project is to explore the potentials of a completely new wind turbine
concept – the Low-Wind turbine, designed for optimal integration in a power system with
considerable
The MADEBLADES project targets further development and prototype demonstration of a disruptive design and manufacturing solution for large (>90m) offshore wind turbine blades.
The purpose of developing a small scale version of the Ecodrying Bio-refining plant is to ease the handling of horse manure for individual properties keeping horses and to turn their horse manure into
The aim of the project is to develop an energy-efficient biomass boiler for straw combustion. The boiler must have a high efficiency and low NOx emissions. The goal is to reduce NOx emissions without
The objective of the project is to develop a special wheeled mixer vessel designed for pretreatment of straw and deep litter before utilization in an agricultural biogas plant.
The purpose is to develop a new methodology for the assessment of the remaining useful life of wind turbine rotor blades individually, based on their individual damage states. The methodology is
The aim of the project is to provide the best possible technological solution for the production of garden park chips with acceptable technical specifications and at the same time pave the way for a
During production of biogas different malodorous compounds are formed, e.g. hydrogen sulfide (H2S) that, without proper waste air treatment, can be a major nuisance towards neighbors to the biogas
The objective of the project is further development and documentation of the online measurement system into an operational tool for real time monitoring and optimization of the biogas process in
The scope of this project is to develop a crane that can install a complete turbine with a hub height of 250m. The turbine can be installed in less than 2 days and the weight of the crane is less than
The obejctive of ProbWind is to develop and demonstrate the basis for reliability-based/probabilistic design of wind turbines, leading to the development of a new international standard on
To take a critical lead forward towards a cost effective and sustainable pipeline between the unutilized global bimass resources on one side and the demand for "green" fuel products on the other side
The objective of the LICOREIM project is to demonstrate lidar-assisted wind turbine control strategies for robust and reliable improvements on both currently operating (i.e. retro-fit solutions) and
The purpose of this project is to test/demonstrate the proof of concept of the developed lifetime extension concept for offshore wind turbines. It is expected that by using the developed concept it
The BE-Clean project will demonstrate a new cleaning process. The process will remove unwanted
sulfur from biogas. The new process is cheaper than currently available technologies and uses
electricity
The project aims at increasing the efficiency of new and operating wind tubines by developing innovative vortex generators, i.e., small devices attached to the surface of blades, improving their
This project focuses on providing solid proof that a) 3D printing can be used to manufacture tall wind turbine towers, b) it can be done economically and technically feasible, c) 2 design concepts for