The project report is the contribution from the industry to an action plan for development and demonstration of CHP technology for solid biomass. The report aims to serve as inspiration and basis for
The central goal of the project is to increase access to the international research results, technological breakthrough and work partners within biomass and energy purpose. The purpose of this is to
The purpose was to ensure a better and more rewarding communication between researchers and practicians, to illustrate which projects may become good business, to follow up the ongoing projects and to
This project is the first phase in the development of an advanced test facility which will enable the wind power industry to develop and test new grid connection solutions, and validate the grid
The objective of the project has been to develop and commercialize nacelle-LIDAR technology for power performance verifications such that the expensive and often difficult use of met masts offshore
The objective is to demonstrate on existing centralised biogas plants how biogas production can be increased and regulated by supplying solid fractions from manure and storable plant material
The project dealt with: optimal use of vortex generators, VGs, that are presently used on most wind turbine blades. Their main effect is to delay separation in the inner part of the blades where for
The projecthas developed a methodto measurenoisefromairfoilsinan industrialwind tunnel,which willhelp to increase theDanishwind turbinecompetitiveness.The methodisthe key tonew
It is a concern in wind energy that wind turbines do not yaw efficiently into the wind due to draw backs of nacelle anemometry. The loss of power is estimated to be 1-3% in flat terrain and offshore
During this project an up-scaled, near commercial CatLiq plant has been designed. The plant is capable of converting low value feedstock such as pig manure into a high value bio oil, which can be used
There has been a further development regarding the manufacturing of bio ethanol from straw and other residues, were the production prices has been reduced to 2 kroners per liter bio ethanol.
The main goal of the project was to develop, demonstrate and implement new tools, models and components in the design process for aeroelastic optimization of Mega-Watt wind turbines with the scope of
The objective of the project was to improve the efficiency of anaerobic digestion of dairy cattle manure. The NiX® treatment improved by 48% the methane yield of the second step of the biogas process
One of Dong Energy's subsidiaries, Inbicon, has developed a technology that manufactures bio ethanol from non food sources, such as wheat straw. A demonstration plant is made in this purpose. Markets'
The project has used tools for process simulation to improve understanding of wind turbine blades. Based on the measurements, the project participants designed a new wing, followed by a demonstration
In the project, a chemical reactor system, called OBATE reformer, has been developed to convert ethanol to diethyl ether and water in order to make it into a diesel fuel. It is shown that the