The purpose of this project was to reveal the possibilities of transport of hydrogen via the existing Danish natural gas grid. The investigation only covers the distribution grid. For this purpose, a
The goal of the project was to construct and test a 10 kW CHP (5 kWe) PEM FC generator aimed for single-family households in Denmark. Two generators, each 'half size' of the project generator goal
The PEM fuel cell car will function as a laboratory where components and modules in the future can be upgraded with improved version. Danish industry gets in this way an opportunity to develop and
The project will demonstrate the concept of application of reversible fuel cells integrated into a building, with generation of hydrogen from excess electricity from nearby renewable energy systems
Based on the results from the project's Part l, the purpose of project tasks described in this report was to reconfigure / update the vehicle for dynamical operation with a Danish-produced PEM fuel
Facing a market structure of independent heating systems and cost-of-service regulation the regulator considers ways to create incentives for increasing efficiency in heat production. One way is to
The activities were: Development of improved components, analysis of durability, contacting, improving the methods, materials development, studies of mechanisms and of defect and structural chemistry
In the autumn of 1999 the IC plant at Nordborg Power Plant was commissioned, and following that the emissions and emission reductions of the plant were measured.
The project constructs and analyses different total energy scenarios for introducing hydrogen as an energy carrier, as energy storage medium and as a fuel in the future Danish energy system. The
The aim of the project is to develop a technique for conversion of standard gasoline engines to operate on hydrogen, including the necessary safety conditions for test running on a closed track, but
It has been demonstrated that flow in large district heating pipes can be measured using LDV. The results of the project indicate strongly that the method is relevant for future check or control of