The annex will give the participants an overview of the technical and environmental assessment challenges encountered in offshore applications and help them to understand the areas of further R and D
IEA Annex 36 investigations have resulted in an easy-to-use electronic tool for retrofitting mainly of schools. The name of the tool is 'Energy concept advisor'.
The project included the second phase of a process aimed at establishing a platform for wind turbine simulation as a prerequisite for advanced electrical design and optimisation.
Future highly insulating types of glazing introduce new perspectives for the use of glass in the architectural design of energy-efficient buildings. The project demonstrates how new types of glazing
The aim of the project is to develop, verify and implement a detailed physical model for the wind field in a wind farm. The model will allow for detailed aeroelastic simulation of wind turbines sited
The overall objective of the project is to ensure the development of an aetoelastic design complex, which can create the basis for the nest generation of wind turbines and make new design trends
This project, HAVDIM2004, aimed primarily at analysing already accessible measurement data from the two Danish offshore wind farms Horns Rev 1 and Nysted Offshore Wind Farm. The project focused on
This project wants to develop a serial of integrated design and environment strategies for the future office environment (New Ways of Working), where architectural, technological, decor and
The project generated results in selected areas of flexible multibody wind turbine modelling. Monte Carlo statistical response simulations and failure probabilities require significantly reduced
In DTU's and LM Wind Power's wind tunnel, the project performed several measurements of the flow behind vortex generators (VG). The project proved that the induced vortices effectively counteract
The project aimed substantially to strenghten the scientific basis for the wind turbine sector in general with particular focus on the Danish sector’s position in offshore wind farms. To meet these
The project was conducted as a PhD study at the DTU in cooperation with Danish foundries and a supplier of foundry machinery. A thorough experimental analysis of the flow of melts in inlet systems was
The project developed and demonstrated an air-conditioning system based on dehumidification via a heat-driven, wet sorption process and adiabatic cooling. Calculations show that (district) heat-driven