The main goals of the simulation platform can be summarized as follows: 1) To extend the ability of the existing wind turbine design tools to simulate the dynamic behavior of the wind turbines and the
The goal has been to further develop and test simple models of district heating systems for simulation and operational optimisation, and to investigate the significance of the load distribution (both
Recent years have witnessed a wide range of energy saving measures in Denmark, which have decreased the unit heat consumption by district heating consumers dramatically. The geometrical density of new
The objective of the project was an improved design base for extreme loads and fatigue loads on wind turbine in flat or mountainous terrain. The main activity was the development of models for non
The aim of the project is to develop better design basis for large wind turbine blade of composite materials by a combination of materials research, structural mechanics, involving both modelling and
The main objectives are the following: a) development of a design tool for analysis of dynamic stability. b) investigations of blade tip aerodynamics and blade tip design on basis of 3D CFD
This pre-project had the aim of establishing the basic technical knowledge to evaluate whether remote surveillance of the rotor blades of large off-shore wind turbines has technical and economical
Ice loading on wind turbine foundations is a design load in the inner Danish seas and straits. Relatively conservative design requirements/guidelines have so far been used for prediction of ice loads
The objective of the project was to build a demo-plant applying a new d.c. technology and to test in an onshore location with the purpose to investigate technical and financial possibilities for a d.c
This project involves experimental verification of three Risø-A airfoils to evaluate their application on Danish wind turbines. The Risø-A airfoils were designed for both stall and pitch regulation by
The project is the first step in a research effort with the overall objective to prepare technical guidelines for grid connection of wind farms to weak grid, and to identify and develop technical
This Annex had as the main objective to set up an aerodynamic data base with experimental results from detailed rotor measurements. The participants in Annex XIV were the five different research
The aim of the project is to analyse energy, environmental and economic aspects of integrating electric vehicles in the future Danish energy system. Consequences of large-scale utilisaltion of
1) To investigate whether the commenly used assumption about Gaussian (normally distributed) turbulence is valid, and possible consequenses of deviations from Gaussianity on load calculations, that