The overall objective of the project is to explore the potentials of a completely new wind turbine
concept – the Low-Wind turbine, designed for optimal integration in a power system with
considerable
The MADEBLADES project targets further development and prototype demonstration of a disruptive design and manufacturing solution for large (>90m) offshore wind turbine blades.
The purpose is to develop a new methodology for the assessment of the remaining useful life of wind turbine rotor blades individually, based on their individual damage states. The methodology is
The scope of this project is to develop a crane that can install a complete turbine with a hub height of 250m. The turbine can be installed in less than 2 days and the weight of the crane is less than
The obejctive of ProbWind is to develop and demonstrate the basis for reliability-based/probabilistic design of wind turbines, leading to the development of a new international standard on
The objective of the LICOREIM project is to demonstrate lidar-assisted wind turbine control strategies for robust and reliable improvements on both currently operating (i.e. retro-fit solutions) and
The purpose of this project is to test/demonstrate the proof of concept of the developed lifetime extension concept for offshore wind turbines. It is expected that by using the developed concept it
The project aims at increasing the efficiency of new and operating wind tubines by developing innovative vortex generators, i.e., small devices attached to the surface of blades, improving their
This project focuses on providing solid proof that a) 3D printing can be used to manufacture tall wind turbine towers, b) it can be done economically and technically feasible, c) 2 design concepts for
The technologies in scope aim at increasing the aerodynamic efficiency of wind turbines, reducing turbine load levels, and increasing the authority of control of wind turbines through additional
The business idea of the blade painting machine is to make the blade production cheaper, safer and more flexible. The SEM-BC will be designed to work with all blade types and is relevant for more than
The objective of the project was to participate in the IEA annex 'Dynamic models of wind farms for power system studies'. The objective of the IEA annex is to establish an international forum for
The main objective of Annex XVII is to provide wind energy planners and designers, as well as the international wind engineering community in general, with easy access to quality controlled measured
The main objective of the project is to implement controller design of wind turbines in the general design process, on the same level as structural dynamics and aerodynamics. Specific focus is on
Background: Within the Aeroelastic Research Program carried out from 1997 to 2002 by Risø and DTU a coordinated and continuous work has been carried out on the development of advanced computer models