The overall objective of the project is to explore the potentials of a completely new wind turbine
concept – the Low-Wind turbine, designed for optimal integration in a power system with
considerable
The MADEBLADES project targets further development and prototype demonstration of a disruptive design and manufacturing solution for large (>90m) offshore wind turbine blades.
The purpose is to develop a new methodology for the assessment of the remaining useful life of wind turbine rotor blades individually, based on their individual damage states. The methodology is
The scope of this project is to develop a crane that can install a complete turbine with a hub height of 250m. The turbine can be installed in less than 2 days and the weight of the crane is less than
The obejctive of ProbWind is to develop and demonstrate the basis for reliability-based/probabilistic design of wind turbines, leading to the development of a new international standard on
The objective of the LICOREIM project is to demonstrate lidar-assisted wind turbine control strategies for robust and reliable improvements on both currently operating (i.e. retro-fit solutions) and
The purpose of this project is to test/demonstrate the proof of concept of the developed lifetime extension concept for offshore wind turbines. It is expected that by using the developed concept it
The project aims at increasing the efficiency of new and operating wind tubines by developing innovative vortex generators, i.e., small devices attached to the surface of blades, improving their
This project focuses on providing solid proof that a) 3D printing can be used to manufacture tall wind turbine towers, b) it can be done economically and technically feasible, c) 2 design concepts for
The technologies in scope aim at increasing the aerodynamic efficiency of wind turbines, reducing turbine load levels, and increasing the authority of control of wind turbines through additional
The business idea of the blade painting machine is to make the blade production cheaper, safer and more flexible. The SEM-BC will be designed to work with all blade types and is relevant for more than
RUNE is short for - Reducing Uncertainty of Near-shore wind resource Estimates using onshore lidars. The key project aim is to reduce the uncertainty of offshore wind resources in Danish near-shore
RePlan project is a frontrunner for the integration of large share of renewable energy in the Danish power system. The novelty of RePlan consists in the investigation and verification of the ancillary
The objective is to improve wind farm modeling techniques and establish guidelines for their usage for the industrial and academic partners. This goal will be reached by supporting the extension of
The objective of this project is to develope a test machine, a rain erosion tester, on which rain erosion af wind turbine blades can be simulated. The rain erosion tester can acelerate simulate
A close collaboration between LM Wind Power and DTU aims to demonstrate a business case and map risks of new load alleviating blade technologies combined with multi-disciplinary optimization. A larger
Danish participation in IEA Wind Task 26 extension will enhance collaboration and understanding of cost trends in wind power, and contribute to knowledge dissemination on the cost aspects of wind
This project supports the Danish participation in IEA Wind Task 37 which aims to establish an international forum to catalyze the usage of systems engineering to design wind power plants, taking into