The goal has been to further develop and test simple models of district heating systems for simulation and operational optimisation, and to investigate the significance of the load distribution (both
Recent years have witnessed a wide range of energy saving measures in Denmark, which have decreased the unit heat consumption by district heating consumers dramatically. The geometrical density of new
De Nationale Geologiske Undersøgelser for Danmark og Grønland
EFP
2001
2002
We have estimated the elastic properties of pure and impure chalk at three different scales on the South Arne field, North Sea, by analysing ultrasonic core data, downhole log-readings and results of
This project describes a plug-and-play concept for intelligent components in heating installations. Intelligent components differ from traditional components by having 'intelligence' in the form of
The object of this project was to investigate the possibility of replacement of electrical heaters with gas fired burners in the mould flow industry. Different kinds of barriers, why gas is not used
The object of the project is to develop a new treatment process for nitrogen removal, primarily to be used in wastewater treatment in the industry. The deammonification process offers a substational
The political and technical objective of the project is to ensure an efficient outcome of the Danish participation in the international work group IEA Bioenergy Agreement, Thermal Gasification of
The long-term objective of the project is to improve the energy efficiency and to increase the annual operating hours for furnaces for waste and/or biomass combustion. The project objective is
The objective of the project was an improved design base for extreme loads and fatigue loads on wind turbine in flat or mountainous terrain. The main activity was the development of models for non
The subject of this project is a total integration of a switch mode audio power amplifier and an electro dynamic loudspeaker into a single unit using the voice coil of the loudspeaker as an output
Power converters are used in various areas like power supplies, motor drives and for power conversion at energy production systems. The use of Zero-Voltage-Switching in power converters has a strong
Based on the measured consumption's it cannot be concluded that floor-heating systems are less energy economic than combined radiator heating/floor heating systems.
The analysis has been focusing on the Danish regulation of wind turbines with the purpose of disclosing possible conflicts with the EC-regulation. It is the conclusion of the project that there is no
KORA, Det Nationale Institut for Kommuners og Regioners Analyse og Forskning
EFP
2001
2005
In order to achieve equitable reduction targets, international trade has to be taken into account when assessing nations' responsibility for abating climate change.
In recent years the liberalisation of energy markets has gained momentum and has resulted in the creation of large electricity markets in Europe. Liberalisation is also taking place within the natural
The goal of the project was to demonstrate a superconducting cable system under realistic conditions in the Danish energy sector. A High-Temperature Superconducting (HTS) cable system was developed in
Microbially influenced corrosion (MIC) is by now a well-known phenomenon also in district heating systems. Bacteria can cause corrosion by various mechanisms including production of corrosive
One of the prime factors affecting deposit formation in straw fired furnaces is the presence of particles, which are transported from the fuel bed through the furnace by a path governed by the
Significant socio-economic benefits are connected with an increase in the flexibility of the Danish energy system. On the one hand it is possible to earn money on trading electricity with our
The aim of the project is to develop better design basis for large wind turbine blade of composite materials by a combination of materials research, structural mechanics, involving both modelling and