The objective is to demonstrate on existing centralised biogas plants how biogas production can be increased and regulated by supplying solid fractions from manure and storable plant material
Denmark has participated in the IEA PVPS activities since its inception in 1993. The Danish participation will be in the following tasks: ExCo, the steering committee of the work in the task and the
The project dealt with: optimal use of vortex generators, VGs, that are presently used on most wind turbine blades. Their main effect is to delay separation in the inner part of the blades where for
The project wants to establish and develop a 3.G. hydrogen filling station. The project is a part of the H2moves Scandinavia project. H2moves all around goal is partly to demonstrate cars driven by
The FCH test center has had a good start and today it has a big national as well international network with the most important team players within the field. The first commercial assignments have been
The projecthas developed a methodto measurenoisefromairfoilsinan industrialwind tunnel,which willhelp to increase theDanishwind turbinecompetitiveness.The methodisthe key tonew
The project is an international IEA – project. The IEA team shall document the methods within system combinations between solar heat plants and heat pumps, which are the most popular technologies at
Large scale PV plants are increasingly established in EU countries, but so far not in Denmark. The project has described the advantages and disadvantages of large scale PV plants in Denmark. It has
Through participation in the executive committee and a number of annexes in IETS, comprising 13 countries, Denmark has contributed to developing technologies for energy-efficiency enhancement in
HyLIFT-DEMO is to conduct European demonstration of the 3rd generation hydrogen powered fuel cell forklifts and supporting hydrogen refuelling infrastructure. HyLIFT-DEMO has the following objectives
LINK2009 -phase 2 is a continuation of the LINK2009 Phase 1 that was started in August 2008 with support from EUDP2008 (ENS 63011-0069) covering development of 2nd generation fuel cell hybrid vehicles
The main objective in this project has been to develop a tool for SOFC system designing with the aim to accelerate the system optimization and reduce the time to market.
The objectives of the project is to break down the barriers for energy renovation of private owned houses in Denmark by: assisting in further development of 4 key energy technologies, exploiting their
Only the nichemarket is accepting the relatively high prices there is to fine within the fuel cell stack. The high develop costs is holding the stack producers in a spiral characterized by its low
It is theoretically possible to achieve a reduction of 19% of the total agriculture's energy consumption by reducing the energy consumption for heating and for electric motors according to reduction
The objective of the project is to promote the use of district heating driven adsorption heat pumps in Denmark. The goal is to ensure that the benefits of adsorption heat pumps, solar energy and
It is a concern in wind energy that wind turbines do not yaw efficiently into the wind due to draw backs of nacelle anemometry. The loss of power is estimated to be 1-3% in flat terrain and offshore
During this project an up-scaled, near commercial CatLiq plant has been designed. The plant is capable of converting low value feedstock such as pig manure into a high value bio oil, which can be used