Process optimisation is performed at the MaxiFuels pilot plant at DTU in the context of, for instance, membrane distillation of ethanol, separation of the permanent residual fraction from glucose
The Castor plant’s gasification reactor is developed to gasify wood pellets instead of wood chips, and an aesthetic and technically efficient design of the plant is developed for adaptation into a
The developed CFD model shows qualitative and quantitative correlation between the model and experiments in a lab scale reactor. When the developed model was implemented in the full-scale plant, it
To develop the market for solid biofuels within the EU, standards are urgently needed. Based on a mandate given by the EC, CEN TC 335 "Solid Biofuels" currently develops such standards based on the
Nanotechnology can provide possibilities for obtaining new valuable information regarding performance and corrosion protection in power plants. In general, the desired performance of the contact
The purpose of this project has been to make preparation for organisational, legal and technical nature with regard to a coming upgrading of BioWynergi Process ApS 450 kWh Open Core stage-phased
DANISH FLUID BED TECHNOLOGY ApS
ForskEL
2007
2012
The overall goals of the project have been to contribute to the continued development of the LT-CFB gasifier, facilitate a small full scale demonstration plant and otherwise improving the basis for
National and international research gas not only revealed that the conversion of biomass particles in suspension-fired boilers differs from the conversion of pulverised coal - it has also, through
The long-term vision of the project was to develop a system for online optimisation of waste incineration. The idea is to base the system on advanced measuring technique, dynamic process models and
In situ simultaneous measurements of gas temperature and gas composition are of great interest in combustion research. An optically based technique can be performed in situ for various extremely hard
The purpose of this project is to investigate oxyfuel combustion of biomass and biomass-coal mixtures in semi-technical scale and supplemented by laboratory experiments and process simulations to
During the project, investigations and development has been performed, focusing on an evaluation of the overall feasibility of gasification of solid biomass in general.
In the present project was investigated how and to which extent the effluent from the biogas process has to be purified in order to recirculate this stream as process water in the MaxiFuels process
Due to difficulties in achieving data, consistency in data, and concensus on data as expected and agreed in the project outline among the project partners, the project unfortunately could not be