The primary objective of the project was to improve the understanding of formation and characteristics of waste incineration residue. The project had specific focus on the importance of waste input
It is technically possible to manage and activate the potential for flexible electricity consumption in the segment of large office blocks and public buildings. Practical experiments have shown that
Ørsted A/S
ForskEL
2005
2011
The purpose of this project was to develop materials with higher resistance to the corrosive elements, in order to reduce the cost of maintenance, increase the availability, and increase the
The objective was to assess the potential of addition of sulphur with a view to emission control in connection with natural gas-firing in swirl-stabilised diffusion burner and in engines and, if
The objective of the overall project was to develop a system for online optimisation of waste incineration. Phase 2 worked to design a measuring programme at Haderslev CHP plant to determine the key
The PSO Project 5820 aimed to study deposit-induced Cl corrosion under well-controlled laboratory conditions, simulating the conditions in biomass-fired boilers. This was done by exposing pieces of
The aim of this project is to implement an online volatile fatty acids (VFA) sensor developed at E and R DTU for monitoring, control and optimization of the biogas process.
The DK-SOFC b line is targeted towards: 1) decrease of the operation temperature without increasing the area specific resistance, 2) increase of the ro-bustness of the cell, 3) better understanding of
The goal of the project was to develop and demonstrate a 3 kWe DMFC generator aimed for Uninterruptible Power Supply. How-ever, a detailed concept evaluation based on the present Danish DMFC stack and
The aim of the project is to utilize Denmark's position and to develop international collaborations in order to optimize four major steps in the Danish Bioethanol concept.
The gasproduction from liquid manure in terms of volume is low and the economy of the plants are often very dependent on the supply of easy degradable waste products and at the moment the extension of
The main objective of the project was to improve biogas production from manures. This objective was addressed by investigating: 1) the effect of different reactor configurations, 2) operational
The goal of the project is to develop and test small (2 kW) reformers for converting natural gas into hydrogen for use in Proton Exchange Membrane (PEM) fuel cell cogen units for single-family houses
The purpose of the project is to clarify advantages and disadvantages, potentials and possible problems when burning or gasifying the separated fibre fraction from biogas production, before the fibre
1) Analyse the country-level, regional and global potential of bioenergy, forestation, and other biomass-based mitigation strategies, including implications for the atmospheric CO2 concentration and
Objective: To synthesise and transfer to stakeholders important international knowledge and new technical information concerning conventional forestry systems for sustainable production of bioenergy.
The aim of this project is to promote research results within bioenergy to researchers, advisers, factories and public authorities among others. The promotion is to be done through a newsletter, six
The project co-financed Danish participation in a European partnership under the 6th framework programme to test whether gas from thermal biomass gasification can be purified sufficiently to be used
Fødevareøkonomisk Institut. Jordbrugets Driftsøkonomi - KU
EFP
2004
2006
The main objective of the project was the identification and analysis of new technical concepts for centralized biogas plants, which would make them less dependant on organic waste supplies, and this