The primary objective of the project was to improve the understanding of formation and characteristics of waste incineration residue. The project had specific focus on the importance of waste input
Ørsted A/S
ForskEL
2005
2011
The purpose of this project was to develop materials with higher resistance to the corrosive elements, in order to reduce the cost of maintenance, increase the availability, and increase the
The objective was to assess the potential of addition of sulphur with a view to emission control in connection with natural gas-firing in swirl-stabilised diffusion burner and in engines and, if
The main purpose of PV Denmark is to continue and enhance the positive development initiated by previous national projects such as Sol-300, Sol-1000 and Sol-2000. The activities shall facilitate, that
The objective of the overall project was to develop a system for online optimisation of waste incineration. Phase 2 worked to design a measuring programme at Haderslev CHP plant to determine the key
GAIA SOLAR A/S
ForskEL
2006
2011
The project aims at developing a window solution, with integrated solar cells in the glazing, which is 30% cheaper than similar products on the market. Development and production of components is
The work documented in this thesis has had its focus on two main sections. The first part is centred around Maximum Power Point Tracking (MPPT) techniques for photovoltaic arrays, optimised for fast
The PSO Project 5820 aimed to study deposit-induced Cl corrosion under well-controlled laboratory conditions, simulating the conditions in biomass-fired boilers. This was done by exposing pieces of
The aim of this project is to implement an online volatile fatty acids (VFA) sensor developed at E and R DTU for monitoring, control and optimization of the biogas process.
The overall strategic objective of PV-ERA-NET is to strengthen Europe's position in photovoltaic (PV) technology by improving the co-operation and co-ordination of PV RTD programming efforts across
The aim of the project is to utilize Denmark's position and to develop international collaborations in order to optimize four major steps in the Danish Bioethanol concept.
The gasproduction from liquid manure in terms of volume is low and the economy of the plants are often very dependent on the supply of easy degradable waste products and at the moment the extension of
The main objective of the project was to improve biogas production from manures. This objective was addressed by investigating: 1) the effect of different reactor configurations, 2) operational
The objective of the project has been to achieve a 10% better price performance for ARCON's HT-SA solar collector and to demonstrate the solar collector and measure the production result.
The purpose of the project is to clarify advantages and disadvantages, potentials and possible problems when burning or gasifying the separated fibre fraction from biogas production, before the fibre
1) Analyse the country-level, regional and global potential of bioenergy, forestation, and other biomass-based mitigation strategies, including implications for the atmospheric CO2 concentration and
Objective: To synthesise and transfer to stakeholders important international knowledge and new technical information concerning conventional forestry systems for sustainable production of bioenergy.
The aim of this project is to promote research results within bioenergy to researchers, advisers, factories and public authorities among others. The promotion is to be done through a newsletter, six