The objective of the project was to investigate whether it was feasible and profitable to use a UPS system in connection with heating, cooling and electricity generation. A test system consisting of a
The project activities have been implemented within the framework of the European OPET Network (Organisations for the Promotion of Energy Technologies), supported by the EU Commission. The OPET
The project purpose is to ensure that a large fraction of the potential for mass- and energyintegration can be exploited in industrial process plants. Today a significant fraction of the potentially
It is the purpose of the project to develop and energy efficient 'straightner' ventilation aggregate with an integrated 'chopper' heat exchanger for single-family houses, buildings of flats, offices
One objective of the project is to investigate the possibilities of developing controlled facade inlets at floor-height for natural ventilation by displacement ventilation, which does not result in
The objective of the project's Phase 1 is to evaluate the possibilities of system solutions with thermoactive constructions acting both as heating and cooling system under Danish conditions and with
Under the IEA-ETDE (Energy Technology Data Exchange) agreement a common database is produced containing descriptions of journal articles, reports, books, conference papers etc. published in the member
The aims are to make information about Danish energy research and its results available to users in Denmark and abroad and, through international cooperation, to make international research and its
De Nationale Geologiske Undersøgelser for Danmark og Grønland
EFP
2001
2002
We have estimated the elastic properties of pure and impure chalk at three different scales on the South Arne field, North Sea, by analysing ultrasonic core data, downhole log-readings and results of
This project describes a plug-and-play concept for intelligent components in heating installations. Intelligent components differ from traditional components by having 'intelligence' in the form of
The object of this project was to investigate the possibility of replacement of electrical heaters with gas fired burners in the mould flow industry. Different kinds of barriers, why gas is not used
The object of the project is to develop a new treatment process for nitrogen removal, primarily to be used in wastewater treatment in the industry. The deammonification process offers a substational
The subject of this project is a total integration of a switch mode audio power amplifier and an electro dynamic loudspeaker into a single unit using the voice coil of the loudspeaker as an output
Power converters are used in various areas like power supplies, motor drives and for power conversion at energy production systems. The use of Zero-Voltage-Switching in power converters has a strong
Based on the measured consumption's it cannot be concluded that floor-heating systems are less energy economic than combined radiator heating/floor heating systems.
The analysis has been focusing on the Danish regulation of wind turbines with the purpose of disclosing possible conflicts with the EC-regulation. It is the conclusion of the project that there is no
KORA, Det Nationale Institut for Kommuners og Regioners Analyse og Forskning
EFP
2001
2005
In order to achieve equitable reduction targets, international trade has to be taken into account when assessing nations' responsibility for abating climate change.
In recent years the liberalisation of energy markets has gained momentum and has resulted in the creation of large electricity markets in Europe. Liberalisation is also taking place within the natural
The goal of the project was to demonstrate a superconducting cable system under realistic conditions in the Danish energy sector. A High-Temperature Superconducting (HTS) cable system was developed in