The main purpose of this project is to demonstrate a large-scale pyrolysis process for production of high-quality biochar and energy from common agricultural waste products. The operation of the
The purpose of the project is thus to develop a full-scale flash pyrolysis plant with a capacity of 15 tons of biomass per day. The plant will be developed in continuation of the reactor patent we
The SkyClean Scale-Up project makes it realistic to achieve a pyrolysis-based reduction of greenhouse gas emissions from the Danish agricultural sector of at least 2 million tonnes of CO2e yearly in
The present application comprises co-funding of the IRD participation in the KeePEMAlive FC JTI project that presently is under negotiation for start primo 2010. The overall objective of the
The main objective of the DuRaPEM project is to further develop pathways and technologies for PEM FCs enabling the national target lifetimes to be met. The project approach is systematically to
The aim of the project is to evaluate and compare – technically and economically – options for using electricity storage to provide short term (seconds to an hour) system services at transmission
The purpose is to clarify advantages and disadvantages of a large biogas grid supplying larger customers. The biogas grid will be connected to the natural gas grid. Some involved subjects are
Nordisk Folkecenter for Vedvarende Energi
ForskVE
2010
2011
The immediate project purpose is to support an accelerated enlargement of PV plants in Denmark by documentation and demonstration of two household PV plants with intended “lighthouse effect” and to
Development and demonstration of an intelligent remote control system for individual heat pumps, enabling the balance responsible party to plan consumption and deliver regulatory power, internal
The purpose of the project is to develop, design and demonstrate a total concept with solar heat, borehole storage and heat pump for electricity regulation and up to 100% reduction of fossil fuels on
The purpose of the project is to improve and validate newly developed models for simulation and prediction of wind power fluctuations, by integrating the tools with meteorological tools for wind
The main purpose of the project is the development of SO3 in-situ IR measurement technique which will be suitable for industrial applications on SCR units of power plants and proved on an industrial
Problem description: The impact of high penetration levels of PV has different dimensions: i) In the distribution network, a high share of PV may require new approaches for voltage control as the
The solid oxide fuel cell (SOFC) is an attractive technology for the generation of electricity with high efficiency and low emissions. This project will improve the power density, durability, and
The aim of project is to investigate the combination of biomass gasification with SOFC in an efficient decentralized and flexible energy system for small scale combined heat and power production. The
The objective of this project is on basis of simple measurements on 6 turbine towers in the Rødsand 2 wind farm to identify, model and verify the basic mechanisms driving the increased loading
The main aim of the project is to investigate and further document the current need for research application on improved electrical efficiency in CHP plants fired with waste on a grate. (Energy 10)
The purpose of the present project is to synthesize, characterize and test new catalysts for Selective Catalytic Reduction of NOx using hydrocarbons instead of ammonia as reductant, including their
Development of control strategy & demonstration of heat pumps (HP) to react on varying electricity prices and deliver regulating power in a flexible power system. Investigation of several HPs
HALDOR TOPSØE A/S
ForskEL
2010
2011
PlanSOEC is to develop a R&D and commercialization roadmap for hydrogen and CO production plants based on the solid oxide electrolysis cell (SOEC) technology. This involves analyzing state-of-the-art