To fulfill the next target goals of MEA performance, amount (mass) of platinum used, cost and lifetime defined in the national Danish strategy on PEM FC, it is of utmost importance to develop material
This project aims to develop a cost-effective high temperature electrolysis technology based on SOECs. The technology development started from the technology developed for SOFCs and takes advantage of
The purpose of the project is to provide the continued research and development which is necessary to improve the cell components and to implement them with industrially relevant production methods
Aalborg Universitet (Fredrik Bajers Vej)
ForskEL
2008
2011
The primary objective of this project is to initiate research activities to support the very successful demonstration project “Dansk Mikrokraftvarme” in two es-sential aspects: 1. As the fuel cell
The goal of the present project was to develop new effective materials for hydrogen storage based on light elements. There are many known hydrides with higher weight percentages of hydrogen; however
The objective of the project has been to develop a compact fuel cell generator using methanol as fuel. The DMFC module will be tested as power generator for internal transport using a Mini Crosser
The purpose of the project is to further develop a Danish natural gas reformer system including optimisation of subsystems and the overall system consisting of a natural gas reformer and fuel cell CHP
The project studied the transportation in a small scale pilot grid at the research centre in Hørsholm, Denmark. The test program included steel pipes from the Danish gas transmission grid and polymer
The project objective was to optimise an LT PEM-based ìCHP and UPS system. Both IRD and Dantherm obtained significant project results. The project results regarding MEA performance, lifetime and stack
MEAs constitute the costliest key component and are also crucial to performance and lifetime of the total system. The project focused on developing basic materials and technologies for MEA improvement
One of the main results in this project is the breakthrough in the development of 2.5G cells, which are now leading in terms of performance and stability. Moreover, increased understanding of the
Methanol and ammonia based on biomass may become highly attractive in a future hydrogen system. Methanol can be produced from biomass with total efficiency of 50%. The same number cannot be reached
Metal supported solid oxide fuel cells were developed for operation in temperature interval 550 – 650 degrees C. Fabrication techniques suitable for large scale production of half cells comprising of