The objective of the project was to develop a sound basis for the decisions on Energy Performance Contracting (EPC) for ESCOs (Energy Service Companies) and building owners with respect to heating of
The objective of the project is to propose more energy efficient and environmentally friendly solutions for DHW systems in buildings and promote the use of such systems.
The main objective of this research project was to study the potential of reducing energy used for ventilating buildings by using low-polluting building materials.
The Stenløse South project is seen as a forerunner project by many (if not most) of the municipalities in Denmark and many of these has visited the site and the municiplaity or has invited
The project developed dynamic simulation models for water-based building-integrated systems (e.g. floor heating, cooling ceilings and building-integrated cooling systems) and implemented them in the
The main aim of the project has been to reduce the total energy consumption in two typical Danish typehouses to a level corresponding to the demands for low energy class 1 buildings in the building
The BRITA in PuBs project within the EU Eco-Buildings programme started in 2004 and finished in spring 2008. The project aimed to increase the market penetration of innovative and effective retrofit
The expression polygeneration is defined as the use of multiple primary energy inputs to create multiple en-ergy outputs. The aim of the project OPTIPOLYGEN is to investigate the potential of
The project purpose is to ensure that a large fraction of the potential for mass- and energyintegration can be exploited in industrial process plants. Today a significant fraction of the potentially
It is the purpose of the project to develop and energy efficient 'straightner' ventilation aggregate with an integrated 'chopper' heat exchanger for single-family houses, buildings of flats, offices
One objective of the project is to investigate the possibilities of developing controlled facade inlets at floor-height for natural ventilation by displacement ventilation, which does not result in
The objective of the project's Phase 1 is to evaluate the possibilities of system solutions with thermoactive constructions acting both as heating and cooling system under Danish conditions and with
This project describes a plug-and-play concept for intelligent components in heating installations. Intelligent components differ from traditional components by having 'intelligence' in the form of
The object of this project was to investigate the possibility of replacement of electrical heaters with gas fired burners in the mould flow industry. Different kinds of barriers, why gas is not used
The object of the project is to develop a new treatment process for nitrogen removal, primarily to be used in wastewater treatment in the industry. The deammonification process offers a substational
The subject of this project is a total integration of a switch mode audio power amplifier and an electro dynamic loudspeaker into a single unit using the voice coil of the loudspeaker as an output
Power converters are used in various areas like power supplies, motor drives and for power conversion at energy production systems. The use of Zero-Voltage-Switching in power converters has a strong
Based on the measured consumption's it cannot be concluded that floor-heating systems are less energy economic than combined radiator heating/floor heating systems.
The developed heating concept was based on design comprising two pipes with or without heating fin and a tangential fan mounted in parallel to the pipes.