The project is testing a new type of IoT sensor technology. Today, the individual IoT sensor must be connected to power or contain batteries. New technology based on induction, makes it possible to
Investigation of the potential for optimized and reduced energy consumption via improved installation, monitoring and continuous adjustment of heat pumps in Danish homes, using IoT enabled machine
Plastic production is an energy intensive process with a high heating and cooling demand. The project will convert direct electricity use to an integrated solution, where the supplied energy is
In the project, a self-learning predictive control is developed and demonstrated that can de-liver the best possible indoor climate at minimal energy consumption. This is achieved with a digital twin
An intelligent adaptive control is being developed for heat pump-driven decentralized ventilation systems. This type of system is gaining ground on the basis of a sustainability criterion, as the
Disinfection with ultraviolet (UV) radiation is an effective but energy consuming way to control the corona pandemic. New UV-LED technology enables new applications of UV-light with potential energy
International lighting standards set important conditions when it comes to saving energy on
lighting. The project will incorporate greater attention to energy savings combined with lighting
quality in
The aim is to develop an electrified fast process for continuous heat treatment of solid foods using ohmic heating. The process is very energy efficient as the energy loss is only around 5%. In
The project shall uncover and realize potentials for energy savings on ventilation systems in public buildings using artificial intelligence on data concerning energy usage, indoor environment
In industry, despite previous efforts, there is still a large realizable potential for energy savings. With the project's developed IT software package, energy audit consultants and energy man-agers
This project focuses on synchronous re-luctance motors, and the frequency converters based on the WBG technology which both will increase the efficiency of the motor systems. The technologies are
Together with the sector suppliers, the project developed a complete testing basis for assessment of the energy properties of ventilation devices on the basis of recognised Danish and foreign
Based on experience with ESCO projects in a number of local authority areas, NRGi Rådgivning developed and evaluated a phase-divided model for an ESCO partnership aiming to make it easier for the
In 1,452 households with remote-read meters in the Syd Energi supply area, customers received regular feedback on their electricity consumption via SMS or e-mail in a pilot project. The subsequent
The project idea is to use prefabricated thermo-active structures as concrete slabs with embedded plastic pipes (PEX). The active concrete slabs are used both as cooling and heating system, peak load
This project has included a PhD course at Aalborg University (AAU) and the Technical University of Denmark (DTU)/University of Southern Denamrk (SDU) and it has developed two types of converter which
The project studied use of information and communication technologies (ICT) in private homes through qualitative interviews, and the consequences for electricity consumption were analysed. Scenarios
The solar shading system development is based on analyses of daylight conditions at different types of solar-shading glass louvres under the IESve/Radiance programme. The chosen system has glass