The project is testing a new type of IoT sensor technology. Today, the individual IoT sensor must be connected to power or contain batteries. New technology based on induction, makes it possible to
Investigation of the potential for optimized and reduced energy consumption via improved installation, monitoring and continuous adjustment of heat pumps in Danish homes, using IoT enabled machine
Plastic production is an energy intensive process with a high heating and cooling demand. The project will convert direct electricity use to an integrated solution, where the supplied energy is
In the project, a self-learning predictive control is developed and demonstrated that can de-liver the best possible indoor climate at minimal energy consumption. This is achieved with a digital twin
An intelligent adaptive control is being developed for heat pump-driven decentralized ventilation systems. This type of system is gaining ground on the basis of a sustainability criterion, as the
Disinfection with ultraviolet (UV) radiation is an effective but energy consuming way to control the corona pandemic. New UV-LED technology enables new applications of UV-light with potential energy
International lighting standards set important conditions when it comes to saving energy on
lighting. The project will incorporate greater attention to energy savings combined with lighting
quality in
The aim is to develop an electrified fast process for continuous heat treatment of solid foods using ohmic heating. The process is very energy efficient as the energy loss is only around 5%. In
The project shall uncover and realize potentials for energy savings on ventilation systems in public buildings using artificial intelligence on data concerning energy usage, indoor environment
In industry, despite previous efforts, there is still a large realizable potential for energy savings. With the project's developed IT software package, energy audit consultants and energy man-agers
This project focuses on synchronous re-luctance motors, and the frequency converters based on the WBG technology which both will increase the efficiency of the motor systems. The technologies are
The project developed a methodology to communicate uniform data on professional laundry machines to decision makers in e.g. the social housing sector and public institutions. The method is a result of
By means of theoretical reports and three specific cases, the project showed how Lean principles can improve energy consulting efficiency, thus making it easier for end-users and energy consultants to
In preparation for an ESCO agreement, the project studied the lighting and ventilation system at Nyrupskolen in Kalundborg. By improving the technical system efficiency, the local authority can expect
The project developed two new LED light sources and systems, emphasising the potential of LED technology for energy savings and lighting quality. An LED light source for display case lighting
The project analysed how advanced statistics can be used to establish multi-parameter sensors/controllers on the basis of the huge amount of data generated by a modern CTS system. A new operations
Further to Elforsk project 337-008, a hydrocyclone pilot plant with a capacity of 8 m3 potato juice per hour was tested at two potato starch factories in Karup and Brande. The 2007/2008 campaign saw
The project developed a tool to optimise interaction between companies and energy saving players. Consisting of an eight-phase model, the tool can probably increase the realisation rate from the
The project took illumination measurements and made subjective assessments of nine fixtures with LED light sources and 13 different LED light sources. The subjective assessments were made by