The objective of the project was to develop a sound basis for the decisions on Energy Performance Contracting (EPC) for ESCOs (Energy Service Companies) and building owners with respect to heating of
It is the goal to increase the fundament for optimising pellet production and give relations between the quality of the pellet and the conditions during the production.
The aim of the MaxiFuels project is the pilot-scale testing and further developemnt of the 2nd generation concept for bioethanol production from lignocellulosic biomass with the production of biogas
The objective of the project is to propose more energy efficient and environmentally friendly solutions for DHW systems in buildings and promote the use of such systems.
The purpose of this project was to show that condensing flue gasses after filtration in a bag filter is an economical and environmental friendly solution for straw fired heating plants.
The opbejctive of the project has been to improve design and process stability in biogas plants. The results can be divided within the following main categories: 1) Pre-treatment, serial coupling of
Co-digestion of manure with fatty waste may improve biogas production and thus the economy of manure-based biogas plants. However, fat is potentially inhibiting for the biogas process, and biogas
The main objective of this research project was to study the potential of reducing energy used for ventilating buildings by using low-polluting building materials.
The Stenløse South project is seen as a forerunner project by many (if not most) of the municipalities in Denmark and many of these has visited the site and the municiplaity or has invited
The project developed dynamic simulation models for water-based building-integrated systems (e.g. floor heating, cooling ceilings and building-integrated cooling systems) and implemented them in the
The main aim of the project has been to reduce the total energy consumption in two typical Danish typehouses to a level corresponding to the demands for low energy class 1 buildings in the building
The BRITA in PuBs project within the EU Eco-Buildings programme started in 2004 and finished in spring 2008. The project aimed to increase the market penetration of innovative and effective retrofit
The expression polygeneration is defined as the use of multiple primary energy inputs to create multiple en-ergy outputs. The aim of the project OPTIPOLYGEN is to investigate the potential of
The objective of the project was to study new deNOx catalysts with improved alkali resistance in relation to flue gas from biomass-fired facilities. Alkali resistance of three types of catalysts is so