SOLBY2006 Solar energy in the energy frame – phase 2. The purpose of phase 2 was to implement a number of development and demonstration projects of solar thermal and photovoltaics for low energy
During the project, investigations and development has been performed, focusing on an evaluation of the overall feasibility of gasification of solid biomass in general.
In the present project was investigated how and to which extent the effluent from the biogas process has to be purified in order to recirculate this stream as process water in the MaxiFuels process
Based on the development projects under the Photovoltaics & Architecture main project, a catalogue has been published of current photovoltaic integration in Danish buildings.
Due to difficulties in achieving data, consistency in data, and concensus on data as expected and agreed in the project outline among the project partners, the project unfortunately could not be
A calculation tool was developed for use of solar energy in renovation and new construction projects - BYG-SOL – for professional clients, local authorities, architects and consultants. The tool may
The objective is to synthesise and transfer to stakeholders important international knowledge and new technical information concerning conventional forestry systems for sustainable production of
Analyse the country-level, regional and global potential of bioenergy, forestation and other biomass based mitigation strategies, including implications for the atmospheric CO2 concentration and
As a specific Danish contribution during the project period, the Bioenergy Group at the University of Southern Denmark updated the report ‘Source separation of organic fraction of household waste’.
The focus on the Danish part of the IEA project SHC Task 32 Advanced Storage Concepts for Solar and Low Energy Buildings was on Subtask C: Storage Concepts Based on Phase Change Materials and on
The overall goal with the participation in IEA PVPS is to maintain and build upon the knowledge transfer to Denmark via the participation in the IEA PVPS work. By the participation a network is
Dust will be produced during production and use of wood pellets. The most critical situations will be identified and changes in routines and equipment will be suggested. Both central heat plants and
The purpose of the project has been to examine the possibilities for PV in an industrialised building process. The project is an information gathering and development project with basis in knowledge
The project proved that PowerShade with an efficiency ratio in excess of 5% can be produced, and that future development will probably further increase its efficiency. The project also showed that the