The project report is the contribution from the industry to an action plan for development and demonstration of CHP technology for solid biomass. The report aims to serve as inspiration and basis for
The central goal of the project is to increase access to the international research results, technological breakthrough and work partners within biomass and energy purpose. The purpose of this is to
The purpose was to ensure a better and more rewarding communication between researchers and practicians, to illustrate which projects may become good business, to follow up the ongoing projects and to
The participants want to develop fully roof integrated solar collectors to fit all roof materials in shape and design. After development demonstration units should be made and tests to get approval
The IEA SHC Task 38 has developed and tested solar driven air-conditioning system for dwellings and stores. The task has developed concepts for small or medium sized systems, documented new pilot
The objective is to demonstrate on existing centralised biogas plants how biogas production can be increased and regulated by supplying solid fractions from manure and storable plant material
Denmark has participated in the IEA PVPS activities since its inception in 1993. The Danish participation will be in the following tasks: ExCo, the steering committee of the work in the task and the
The project is an international IEA – project. The IEA team shall document the methods within system combinations between solar heat plants and heat pumps, which are the most popular technologies at
Large scale PV plants are increasingly established in EU countries, but so far not in Denmark. The project has described the advantages and disadvantages of large scale PV plants in Denmark. It has
The objective of the project is to promote the use of district heating driven adsorption heat pumps in Denmark. The goal is to ensure that the benefits of adsorption heat pumps, solar energy and
During this project an up-scaled, near commercial CatLiq plant has been designed. The plant is capable of converting low value feedstock such as pig manure into a high value bio oil, which can be used
The purpose of the project is to develop demonstrate and document a new renovation concept for existing multi storey housing, reducing the energy demand to Low Energy Class 1. Results are disseminated
There has been a further development regarding the manufacturing of bio ethanol from straw and other residues, were the production prices has been reduced to 2 kroners per liter bio ethanol.
The objective of the project was to improve the efficiency of anaerobic digestion of dairy cattle manure. The NiX® treatment improved by 48% the methane yield of the second step of the biogas process
One of Dong Energy's subsidiaries, Inbicon, has developed a technology that manufactures bio ethanol from non food sources, such as wheat straw. A demonstration plant is made in this purpose. Markets'
The goal was to investigate and demonstrate the abillity to store excess heat in the subsoil down to 100 m in so-called energy wells, and then use the accumulated heat via a heat pump during winter.
DTU has transferred a production technology for the manufacture of plastic solar cells to Mekoprint. Factor 3 has developed electronics that optimize the function of the plastic solar cell lamps and
In the project, a chemical reactor system, called OBATE reformer, has been developed to convert ethanol to diethyl ether and water in order to make it into a diesel fuel. It is shown that the